#87130 - HPI ROTO START 2 SYSTEM (FOR NITRO STAR F SERIES ENGINE w/PULLSTART)
For HPI Nitro Star F Series Pullstart Engines/Requires a 7.2V rechargeable "stick" battery pack and charger.
Discontinued, replacement part: #160060
Start your vehicle quickly and easily with the updated Roto Start 2. The Roto Start 2 features a more durable case and to protect your engine it comes with a built in circuit breaker which cuts off in case of an overload (e.g. a flooded engine).
This HPI Nitro Roto Start 2 system is for the F & G series engines
that use a 12mm One-Way Bearing.
The F3.5 V2, F4.6 V2, and G3.0 HO engines use a 14mm One-Way
Bearing. For these engines use backplate #113736 or change the bearing to #1430.
Note: When using this system for the Trophy Truggy, whilst not
essential, using starter shaft #87104
will give you some extra reach to the back of the engine.
The Roto Start 2 comes in three versions:
#87130 - HPI Roto Start 2 System for
the Nitro Star F Series Engines
#87132 - HPI Roto Start 2 System for
the Nitro Star 12/15/18 Engines.
#87148 - HPI Roto Start 2 System for
the Nitro Star K Series Engines
7.2V stick battery packs are not included.
Please see our
Roto Start Compatibility Guide to check if this is the right
Roto Start system for you.
Discontinued Unfortunately, the part that you require is an older part which has been discontinued and therefore no longer available from HPI Racing. There may still be old stock available, please check with your local distributor for local retailer and stock information.
Click to download PDF instructions (4.5 MB)
#87612 HPI NITRO START CASE SET