#160060 - HPI ROTO START 3 SYSTEM (FOR NITRO STAR F/G SERIES ENGINE w/PULLSTART)
For HPI Nitro Star F/G Series Pullstart Engines/Requires a 7.2V rechargeable "stick" battery pack and charger.
Get things going quickly with the Roto Start 3 starting
system, The Roto Start 3 lets you use a handheld starting unit so
you don’t have to deal with starting the engine by hand - it
really doesn’t get any easier to get
running!
The Roto Start 3 has an Xtra-Long starting wand to make sure
you can get through to the back of the engine without struggle even
on the Savage XL 5.9
To protect your engine, the Roto Start 3 features a built in
circuit breaker which cuts off in case of an overload (e.g. a
flooded engine).
This HPI Nitro Roto Start 3 system is for the F & G series
engines that use a 14mm One-Way Bearing.
The G3.0 engines #15105 & #101310 use a 12mm One-Way Bearing. For these
engines, change the bearing to #107829.
Available separately:
#160242 Roto Start 3 Hand Unit
Only
#160243 Roto Start 3 Starter Shaft
225mm Only
#120277 Rotostart 3 Back Plate for
14mm Hex
Not Included:
Requires a 7.2V NiMH stick battery pack for
operation.