#113736 - ROTO START BACK PLATE 14mm HEX UNIT (F/G SERIES)

Fits F and G Series engines/Use with 107829 ONE WAY 14mm HEX

Discontinued, replacement part: #120277

Roto Start backplate for the F Series V2 engines that use a 14mm one way bearing.

To use this backplate, your F Series engine must be fitted with #1432 - STARTING SHAFT & #107829 - ONE WAY BEARING 14mm HEX FOR PULLSTART/ROTOSTART

Use with any Starter unit from a Roto Start or Roto Start 2 system or purchase Starter Unit and Starter Shaft separately:

#87137 - HPI ROTO START 2 SYSTEM (STARTER UNIT)
#87116 - STARTER SHAFT WITH O RING 183MM (ROTO START)
#87104 - STARTER SHAFT WITH O-RING (225MM)

Note: When using this system for the Trophy Truggy, whilst not essential, using starter shaft #87104 will give you some extra reach to the back of the engine.

Please see our Roto Start Compatibility Guide to check if this is the right Roto Start system for you.

See below for kit compatibility.

Download PDF instructions for #113736 (2.2 MB)