#160239 - Reactor 600 Charger (AUS)

The HPI Reactor 600 is the ultimate charging companion for every RC hobbyist's toolbox!
This 50W AC100-240V mains input charger has great compatibility with currenty available RC battery types including NiMH, NiCd, LiPo, LiFE and LiHV.
The reactor 600 has a simple a 2 button control and suits 2-6S LiXX packs with balance charging and 4-10S NiXX packs with fast charging up to a maximum of 6 Amps. 

Perfect for All RC Hobbyists 
With the ability to charge a wide variety of battery types in various sizes and capabilities, the Reactor 600 is ideal for all car, airplane and boat RC enthusiasts.

LiPo/LiFe/LiHV Balancer 
Safe charging of lithium type batteries from 2S up to 6S. 
When charging LiPo battery packs - HPI Recommends the addition of #160013 Plazma Pouch

NiMH & NiCd Battery Charging 
Charge all current NiMH or older NiCd cells at up to 6 amps for safe and fast charging.

Easy to use 
Simple Blue LED display and 2 button input gives a clear and easy setup to charge your desired battery pack. 

Multiple Connectors Included
Power inputs: 
Standard AUS 2-pin laptop power supply connection for AC 100-120V
Charger outputs: 
4mm gold connector with T-Plug connector.
Conversion leads from a T-Plug female connector to Tamiya, Futaba Receiver and XT-60 connectors also included. 

Full Specification:
Power Input: AC 100-240V
Charge Current Range: 0.5-6.0 amp (50W max)
NiCd/NiMH battery cell count: 4-10 cells
LiPo/LiFe/LIHV cell count: 2S-6S
Weight: 274g
Dimensions: 140 x 75 x 44mm
Instruction Manual in English, German, French & Spanish

Available for the following regions:
#160236 - HPI Reactor 600 Charger (US 2 Pin)
#160237 - HPI Reactor 600 Charger (UK 3 Pin)
#160238 - HPI Reactor 600 Charger (EU 2 Pin)

Download PDF instructions for #160239 (8.3 MB)