#101898 - PRO-SERIES TOOLS ULTIMATE TUNING SCREWDRIVER
Flat blade screwdriver with Infra Red Temp Sensing device for accurate engine tuning
Discontinued, replacement part: #110608
The perfect nitro engine tuning tool has arrived!
At one end of this wonderful tool is an accurate infra-red
temperature sensor, and at the other is a flat blade screwdriver
for tuning all three needles of your nitro or petrol engine!
You no longer have to take two tools trackside or bashing to obtain
perfect engine tuning. Simply use the HPI Ultmate Tuning
Screwdriver to check the temperature of your Nitro engine and tune
it properly. Use the cone protector to accurately aim your sensor
at the plug to obtain the correct temperature reading, then spin
the tool in the palm of your hand and tune your engine to
perfection.
The HPI Ultimate Tuning Screwdriver is supplied in a neat blister
package which can be used to keep the driver in tip top shape
whilst in your tool box. It's supplied with all you need. Just fit
the batteries and the blade and your ready to go. The driver also
comes with a high temperature rubber cone for accurate recording of
temperature and also prevents the sensor from impact damage, whilst
the hard cap is used to protect the sensor whilst the driver is not
in use.
HPI Ultimate Tuning Screwdriver is also Ideal for electric drivers
wanting to keep an eye on their motor, speedo, battery or tyre
temperatures!
Other tool tips can be inserted into the blade end to suit your
particular application.
Specification:
Measurement Temp : -33 to 220 C (-27.4 to 428 F)
Accuracy: +/-2.5%
Resolution: 0.2 C (0.5 F)
Response: 1 Second
With the full set of HPI Pro-Series Tools at your side, you'll
never need another tool again!
#101890 - Pro-Series Tools 1.5mm
Allen Driver
#101891 - Pro-Series Tools 2.0mm
Allen Driver
#101892 - Pro-Series Tools 2.5mm
Allen Driver
#101893 - Pro-Series Tools 3.0mm
Allen Driver
#101894 - Pro-Series Tools 5.5mm Box
Wrench
#101895 - Pro-Series Tools 7.0mm Box
Wrench
#101896 - Pro-Series Tools PH2 5.8mm
Screwdriver
#101897 - Pro-Series Tools # 1 Flat
Blade Screwdriver
#101898 - Pro-Series Tools Ultimate
Tuning Screwdriver
#101899 - Pro-Series Tools 4.0mm
Allen Driver
#101912 - Pro-Series Tools 5.0mm
Allen Driver
#101913 - Pro-Series Tools Body
Reamer
#101914 - Pro-Series Tools Pouch
#107263 - Pro-Series Tools PH1 3mm
Cross Head Screwdriver
Discontinued Unfortunately, the part that you require is an older part which has been discontinued and therefore no longer available from HPI Racing. There may still be old stock available, please check with your local distributor for local retailer and stock information.