#101278 - Flux Reload Brushless ESC
Discontinued, replacement part: #101749
If you're looking for a electronic speed control that is fully-featured, programmable, and suitable for 2S LiPo power or up to 9 NiMH cells, look no further than the Flux Reload Brushless ESC! This speedo has everything you could want for fun running and bashing - and if you want to take it to the track that's great too! Combine with the #1012789 Flux Shot Brushless Motor for a major boost to any standard brushed motor RTR kit!
Spec Continuous Current – 35A Burst Current – 190A 4-9 cell NiMH or 2 cell LiPo (the fan is rated at 7.2v) BEC Output – 6v/1.5A Dimensions – 32.5x27.5x24mm (Fan not included) Weight - 30g Sensorless Features Three Running modes – Racing (brake only), Reverse and Rock Crawler Proportional ABS brake function with 4 steps of brake force adjustment, 8 steps of drag-brake force adjustment, 4 steps of initial brake force adjustment, 4 steps of reverse force adjustment, 8 steps of motor timing adjustment and 9 soft start (Punch) mode settings from soft to aggressive. Multiple protection features: Low voltage cut off protection for LiPo or NiMH/NiCd battery, Overheat protection for the ESC, Throttle signal loss protection and motor blocked protection. Easily programmed with only one setup button, and is compatible with the pocket sized 2 in 1 professional program card. (Available separately as #101280)
Discontinued Unfortunately, the part that you require is an older part which has been discontinued and therefore no longer available from HPI Racing. There may still be old stock available, please check with your local distributor for local retailer and stock information.