This Part Fits the following kits / parts:

Show Discontinued Kits

#120018 - HPI SS-20WR SERVO (WATER-RESISTANT/6.0V/6.5KG/PLASTIC GEARED)

This water-resistant servo is ideal for bashers and racers looking for a tough and durable servo that can be used in wet conditions (e.g. rain, snow, puddles).

Features:
Operating Voltage: 4.8-6V
4.8V: Speed: 0.14 sec/60 degrees, Torque: 4.2kg-cm
6V: Speed: 0.11 sec/60 degrees, Torque: 6.5kg-cm
Servo Spline: 25T

Dimensions:
Main case: 40.7x39.4x20.0mm (excluding mounting tabs, servo spline, & cable outlet)
Mounting tab hole centres: 50.0x9.8mm

Weight: 42g (excluding servo horn)

NOTE: This servo is water-resistant only, meaning it is resistant to splashes and brief contact with water. It is not waterproof and therefore not suitable for submerged used. Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts. 

Kevin Murphy and Jason Maloney of CVR Global LLP and Kevin Brown of Kevin Brown Advisory Limited were appointed as Joint Administrators to manage the affairs, business, and assets of the Company on 1 April 2019.
All enquiries and correspondence should be addressed to the Joint Administrators at CVR Global LLP, 20 Furnival Street, London EC4A 1JQ or to Jake Beake at jbeake@cvr.global.

The Joint Administrators act as agent of the Company without personal liability.

All Licensed Insolvency Practitioners of the Administrators' firm are authorised in the UK by the Institute of Chartered Accountants in England and Wales.

Select your region:

Select your language:

Get more HPI! Login to MYhpi now!

Please select your region and language settings