#117110 - SC-3SWP3 CRAWLER EDITION ESC
SC-3SWP3 Crawler Edition Waterproof ESC featuring a unique Hill
Descent Control (HDC) feature.
The SC-3SWP3 is a powerful and durable speed controller that is
also fully waterproof, making it the only choice for anyone who
enjoys playing on the beach, in snow or even through mud!
The ESC is programmed with the use of jumpers to select one of
three settings:
1) F/R with 100% Drag Brake - Crawler mode for steep and rough
terrain.
2) F/R with 80% Drag Brake - HDC mode for moderately steep
terrain
3) F/B/R Drag Brake Off - Higher speed, open trail driving
The Hill Descent Control (HDC) function will maintain a smooth
controlled speed while descending. When the throttle position is at
neutral, brakes will be applied automatically. Additional braking
can be applied manually as needed for extreme descents. Once
throttle position is returned to neutral, HDC will continue to
function.
If you've got plenty of power to strap into your RC, you can count
on the SC-3SWP3 to handle it: able to handle LiPo power of 2S and
3S or between 5 and 9 NiMH cells, this speedo can handle just about
anything can you fit into the chassis! Of course, a safety cut-off
is fitted to protect your LiPo batteries.
Specification:
Forward Continuous Current: 60A
Forward Burst Current: 360A
Reverse Continuous Current: 20A
Reverse Burst Current: 90A
Input: 2-3S LiPo, 5-9 cell NiMH/NiCd
Applications: 1/10 off-road crawler
Motor Limit: 2S LiPo or 6 cell NiMH: 540 or 550-size motor great
than or equal to 12 turn, RPM over 30,000 at 7.2v
Motor Limit: 3S LiPo or 9 cell NiMH: 540 or 550-size motor great
than or equal to 18 turn, RPM over 20,000 at 7.2v
Resistance: FWD 0.002 Ohm, BWD 0.004 Ohm
PWM Frequency: 1 KHz
BEC: 6V/3A
Dimensions: 36x29.5x17.5mm
Weight: 41g
NOTE: Before driving in wet conditions, make sure
that other electronics fitted to the vehicle are safe to use
(marked as water-resistant or waterproof), or that they are fully
enclosed and protected from water and moisture (such as in a sealed
receiver/battery case). Fans mounted on speed controllers are not
water resistant - we recommend to disconnect the fan from the ESC
before driving in wet conditions and allow it to dry fully before
reconnecting the fan power. Lubricate exposed metal drivetrain
parts such as bearings, outdrives and diff shafts before driving in
wet conditions. Motors are not intended for submerged use and may
be damaged if used when under water. After driving in wet
conditions, make sure to rinse off dirt and any corrosive liquids
like saltwater with plain water and re-lubricate metal drivetrain
parts.