#107856 - FLUX ALPHASTAR 2350kV BRUSHLESS MOTOR (210mm WIRE)
This version of the Flux Alphastar 2350Kv Brushless Motor has longer wires to reach the ESC mounted under the spare tire at the back of the Apache C1. The Flux Alphastar 2350 features a 5mm motor shaft. It can fit optional pinion gears so you can gear it up for high speed runs, or gear it down a bit for increased acceleration on the track.
NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.