Hot Bodies will be releasing a Pro-level competition 2WD buggy in time for the summer racing season! The Cyclone series of racing cars has been at the top of their game since their release. With an IFMAR World Championship title, plus national, European and DHI Cup wins for the Cyclone Touring Car, British National Championship and International Indoor Championship titles for the Cyclone 12 and a top 10 finish at the IFMAR Electric Off-Road World Championships for the Cyclone D4, there aren't that many more classes for Hot Bodies to dominate!
The Cyclone D2 is set to conquer the electric 2WD buggy class around the world. In development for over a year and designed with strength, tuning, maintenance and compatibility in mind, the Cyclone D2 will revolutionize 2WD off-road! The first thing you'll notice is the aluminium main chassis. This chunk of machined 7075-series alloy serves as the backbone of the Cyclone D2 and also as a solid mounting point for all the critical components of the buggy. The battery tray can fit standard 6 or 7 cell sub-C batteries or any hard case Li-Po pack designed for RC cars, held in place with large thumbscrews for a secure fit. By using stiff foam padding and offset cell trays you can easily alter the weight balance of the buggy for increased steering or more traction. At the front end, you'll find a unique split shock tower that securely mounts the shocks in place using one of 5 shock mount locations. Three mounting locations on the suspension arm give you a multitude of tuning options, and vertical camber link ball studs on the front steering hub allow you to quickly make roll centre adjustments. At the rear the suspension setup is similar, with a split shock tower, 5 upper shock mount locations and 3 more on the arm. The rear hubs also feature quick roll centre tuning with vertical ball stud mounting, and CV-style driveshafts get all the power from the motor to the drive wheels. The 3-gear transmission and motor are mounted in the traditional manner, behind the shock tower, to fit the driving style of nearly all off-road racers. Carbide diff balls and long-wearing components inside the diff and transmission reduce maintenance times and make sure that all the power from the motor gets to the ground. The shocks at both ends use hard-coated, threaded aluminium bodies with upper and lower threaded caps and titanium nitride-coated shafts for long life and durability. The wing can be mounted either high or low to enhance traction or speed, depending on the needs of the track. In development for over one year Track-tested by World Champions 7075-series aluminium main chassis Fits 6-7 cell NiMH battery packs or RC Li-Po packs for maximum versatility Battery held in place with thumbscrews for secure fit Maximum versatility out of race-optimized suspension Hard-coated, threaded shock bodies for fast adjustment Upper and lower threaded shock caps for quick rebuild times Unique split front & rear shock towers with 5 upper and 3 lower mounting points Vertical ball stud links for simple roll centre changes Three-gear transmission for optimal drivetrain efficiency Aerodynamic fitted bodyshell with scoops and cooling vents High downforce wing can be mounted high or low for best effect on the track