#80594 - HPI SF-5 SERVO (METAL GEAR/8.9kg-cm 6.0V)
High Torque Servo with Metal Gears and Ball Bearing/Futaba J Connector
Discontinued, replacement part: #101996
Stock steering servo on Savage XL. Standard size and extremely strong. A great steering upgrade for any Savage monster truck!
Speed: (0.20 sec/60° @ 6V) and (0.25 sec/60° @ 4.8V)
Torque: (124 oz-in (8.9 kg-cm) at 6V) and (99 oz-in (7.1 kg-cm) at
4.8V)
Tough metal gears for durability
25 tooth spline
NOTE: NOT WATERPROOF! Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.
Discontinued Unfortunately, the part that you require is an older part which has been discontinued and therefore no longer available from HPI Racing. There may still be old stock available, please check with your local distributor for local retailer and stock information.