#160898 - FLX16-3S30-WP Flux ESC with XT-30

The FLX16-3S30-WP Flux ESC is a small yet powerful speed controller that is fantastic for small scale RC vehicles of all types! Whether you've got a touring car, or monster truck, this is the ideal unit to control the power for any vehicle equipped with a 20 or 24 size brushless motor.

The FLX16-3S30-WP Flux ESC is the perfect match for the FLX16-2435-4500KV Brushless Motor for amazing stunts like giant jumps, back flips, colossal top speeds, and wheel-spinning sideways action!

Waterproof protection means you can take your truck equipped with the FLX16-3S30-WP into territory that would scare off other drivers: puddles, mud, and more! 

FLX16-3S30-WP Features:
Waterproof Brushless Crawler ESC
Operating Voltage: 2-3S LiPo
ContinuousCurrent: 30A
Power Connector: XT-30
BEC Output: 6V/2A
Dimensions: 33.4x26.8x15.1mm
Weight: 38.5g

Compatible with the Hobbywing LED Program Card

NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend disconnecting the fan from the ESC before driving in wet conditions and allowing it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when underwater. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.