#105366 - HPI SF-50WP SERVO (WATERPROOF/12.0kg-cm6.0V)

High Torque Servo/Futaba J Connector/Metal Output Gear

Discontinued, replacement part: #110650

This extra-strong, waterproof servo is ideal for bashers and racers looking for a super-tough and extra-durable servo for absolutely any kind of condition. Use this in your truck, buggy, touring car, monster truck - any kit that requires a standard-size servo to handle whatever you can drive through!

Standard Futaba 'J' connector, with impressive spec:
Speed: 0.18 sec/60 degrees (at 6V)
Torque: 12kg-cm at 6V
Waterproof
25 tooth spline

NOTE: Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.

Discontinued Unfortunately, the part that you require is an older part which has been discontinued and therefore no longer available from HPI Racing. There may still be old stock available, please check with your local distributor for local retailer and stock information.

More information about stock levels

Download PDF instructions for #105366 (3.5 MB)