#102491 - HPI SF-20 SERVO (HIGH TORQUE/6.6kg-cm 6.0V)
High Torque Servo/25 Spline
Discontinued, replacement part: #104109
New from HPI is the high torque SF-20 Servo. The SF-20 is a high-performance upgrade to the SF-1 servo, and a direct replacement for the SF-2 servo found in many HPI car and truck kits.
Specs:
6.0V Speed: 0.17sec/cm
Torque: 6.6kg/cm
High Torque
25-tooth Spline
NOTE: NOT WATERPROOF! Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.
Discontinued Unfortunately, the part that you require is an older part which has been discontinued and therefore no longer available from HPI Racing. There may still be old stock available, please check with your local distributor for local retailer and stock information.
Click to download PDF instructions (0.2 MB)
#110650 HPI SS-40WP SERVO (WATERPROOF/6.0V/10KG/METAL GEARED)