Microbe 1/24th 2WD Buggy –
Big Fun, Small Footprint
The Maverick Microbe is proof
that big thrills really do come in small packages.
This 1/24th scale off-road buggy squeezes proper racing tech into a
compact chassis you can run almost anywhere – from makeshift
indoor circuits to rough-and-ready backyard tracks.
A sleek 1.5mm anodized aluminum chassis, fully ballraced drivetrain
and a smooth 3-gear rear transmission work together to give the
Microbe a planted, precise feel. Add in oil-filled coilover shocks
and vented wheels with foam inserts, and you’ve got a tiny
buggy that loves to carve corners, soak up bumps, and fire out of
turns with confidence.
Under the “Top
Notch” polycarbonate shell, there’s real hardware doing
the work: metal gears where it counts, metal outdrives, axles and
rear dogbones for durability, plus a sealed differential for
consistent performance run after run.
The MSRS-702 2-in-1 ESC/RX and MS-030 brushed motor keep things
simple and reliable, while the quick-access battery tray makes pit
stops fast and fuss-free. Fully Ready-To-Run with the MTX-702
radio, 7.4V 350mAh LiPo and USB charger included, you’re just
a charge away from your first race.
And because going fast should look good too,
the Microbe comes in six vibrant colors: Blue, Red, Orange, Green,
Yellow and Pink – each with both a painted and a clear wing
in the box.
Whether you’re bashing with friends, setting lap records on
your desk, or building a fleet in every color, the Microbe turns
any space into your own miniature off-road playground.
Microbe Racing Wheel and Tire Sets!
Putting the power down is where the Microbe really shines. Its dedicated Microbe Racing wheels and tires are designed to make this tiny buggy feel glued to the ground, with an off-road tread pattern that finds grip on carpet, dirt, and dusty tarmac alike. The vented 7mm hex wheels help the tires stay consistent over longer runs, while the foam inserts support the carcass so the buggy stays sharp and predictable in fast direction changes. Whether you’re threading through a tight indoor layout or sending it down the street, the Microbe’s race-style wheel and tire combo gives you the confidence to push harder, lap after lap.
Polycarbonate Race Shell and Wing!
The Microbe’s “Top Notch” polycarbonate bodyshell gives this tiny buggy a serious race-car attitude. Sculpted with clean, modern lines and a low profile, it’s designed to look fast even when it’s sitting still, while the matching rear wing adds both style and extra stability at speed. Tough Lexan construction shrugs off rollovers, barriers and the occasional misjudged jump, so the car keeps its sharp, fresh look run after run. With six vibrant color options and both painted and clear wings included, you can keep it box-art, mix and match, or go full custom and turn your Microbe into a miniature signature race machine.
Sturdy front suspension setup!
Up front, the Microbe is built to take a beating and keep its line. The rigid front bracing ties the suspension and chassis together for a solid, confident feel, so the buggy soaks up the bumps without the steering going vague. Combined with the oil-filled shocks, the front end tracks smoothly over jumps and landings, keeping the tires planted and the buggy pointing exactly where you want it. The result is a tiny car that feels tight and precise, whether you’re diving into a tight hairpin or bouncing across a rough, improvised off-road section.
Quick and efficient body removal and battery replacement!
Keeping you on track is as easy as peel, twist and play. The Microbe’s lightweight polycarbonate “Top Notch” bodyshell is secured with Velcro, so you can pop it off in seconds—no tiny body clips to drop or lose—while the ultra quick battery system uses two easy-access 90-degree twist locks to release the pack in an instant. Despite the fast access, everything sits snug and secure while you’re driving, staying locked in place through rolls, jumps and hard landings. It’s the perfect balance of convenience and durability, letting you spend more time driving and less time fiddling.
Durable Drivetrain, Dialled-In Rear Grip!
Putting the power down is the Microbe’s specialty, thanks to a tough drivetrain and a planted rear end that’s built to race. Metal outdrives, axles and rear dogbones team up with a sealed 3-gear differential and metal top layshaft gear to deliver smooth, consistent drive you can rely on, run after run. Out back, the oil-filled coilover shocks and carefully tuned rear suspension geometry keep the tires pressed into the surface, soaking up bumps and landings without upsetting the car. The result is a tiny buggy that feels solid, responsive and driveable at the limit—built to handle everything from parking-lot bashing to serious micro racing.
Balanced Layout, Big Confidence!
The Microbe might be small, but its layout is pure race car thinking. Key components are positioned for a low centre of gravity and balanced weight distribution, so the buggy feels planted and predictable whether you’re flicking it through tight switchbacks or landing off a jump. The result is a tiny chassis that changes direction cleanly, stays stable under braking and acceleration, and lets you lean on the grip with confidence. It’s this carefully considered balance that makes the Microbe feel “right” from the very first run, on almost any surface.
The perfect size for bashing!
Small enough to go anywhere, the Microbe’s compact 1/24th footprint turns almost any space into a race track. Its short wheelbase and narrow width make it perfect for tight indoor layouts, office carparks or quick lunchtime blasts in the garden. Easy to slip into a backpack, desk drawer or gear bag, it’s the kind of buggy you can always have with you, ready for a quick run whenever and wherever the opportunity appears. Despite its tiny size, the proportions are pure race buggy, so it still looks and drives like a serious off-road machine, just scaled down to micro mayhem.
MYHPI:
THE ULTIMATE RESOURCE
FOR YOUR Microbe
Once you've got your Microbe, add it to your MYhpi garage to get direct information about what will make your car faster, more adjustable and easier to tune. Add your entire HPI and Maverick collection to your MYhpi garage so you can directly access manuals, videos, tips and help for each of your HPI cars!
#150851 Maverick Microbe 1/24th Buggy -
Pink
Features:
- Front to back 1.5mm aluminum chassis plate with composite sideguards
- 3-Gear rear sealed differential - Metal internal and crown gear
- Metal outdrives, axles and rear dogbones
- 0.5M 3-Gear rear gearbox with metal layshaft gear
- Spur gear cover
- Optional gearing sets included
- Twin bellcrank steering and sprung servo saver
- Microbe Racing Wheel and Tire set. 7mm Hex, Vented wheels, with foam inserts
- Oil-filled threaded-bodied shocks
- Quick access battery tray with adjustable rear brace
- Polycarbonate “Top Notch” body and rear wing
- Fully Ballraced
- MSRS-702 2-in-1 ESC/RX
- MS-030 63T Brushed Motor
- SD-01WR Micro Servo(6.0V/0.85kg/Plastic Geared)
- Pre-Cut Factory Finished Polycarbonate Bodyshell available In Multiple Color Options
- Decal sheet included to customise your Microbe buggy however you want!
Techical Specification:
Length: 173mm
Width: 107mm
Height: 54mm
Wheelbase: 119mm
Weight – 173g brushed 189g brushless (Including
battery)
Factory
shock oil weight: 100CST
Diff Oil or Grease: Greased
Standard gearing 12T/45T
Optional pinions included 11T, 13T
Optional spur gears included 42T
Internal transmission ratio: 3.4
Rear outer tyre Dia. – 35mm
Front outer tyre Dia – 33mm
What
you need:
4 AAA batteries for transmitter
LiPo Charge Case - HPI Recommends #160013 Plazma
Pouch
Specification may be subject to change