#105396 - SFL-11MGWP SERVO (WATERPROOF/24.7kg-cm 6.0V)
High torque water proof servo/Futaba J Connector/Metal Output Gear
Discontinued, replacement part: #120020
The SFL-11MGWP is a waterproof version of the SFL-11MG, the 1/5th scale large-size servo for the Baja line up of cars.
This servo has a surprising amount of power available: nearly 25kg-cm at 6 volts, making it ideal for single-servo control of the Baja buggy and truck front wheels!
Note: this servo requires a 25-tooth servo horn/arm (#87280 is included), which may be different than the servo you are replacing in your HPI kit.
NOTE: Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.