#101898 - PRO-SERIES TOOLS ULTIMATE TUNING SCREWDRIVER
Flat blade screwdriver with Infra Red Temp Sensing device for accurate engine tuning
Discontinued, replacement part: #110608
The perfect nitro engine tuning tool has arrived!
At one end of this wonderful tool is an accurate infra-red temperature sensor, and at the other is a flat blade screwdriver for tuning all three needles of your nitro or petrol engine!
You no longer have to take two tools trackside or bashing to obtain perfect engine tuning. Simply use the HPI Ultmate Tuning Screwdriver to check the temperature of your Nitro engine and tune it properly. Use the cone protector to accurately aim your sensor at the plug to obtain the correct temperature reading, then spin the tool in the palm of your hand and tune your engine to perfection.
The HPI Ultimate Tuning Screwdriver is supplied in a neat blister package which can be used to keep the driver in tip top shape whilst in your tool box. It's supplied with all you need. Just fit the batteries and the blade and your ready to go. The driver also comes with a high temperature rubber cone for accurate recording of temperature and also prevents the sensor from impact damage, whilst the hard cap is used to protect the sensor whilst the driver is not in use.
HPI Ultimate Tuning Screwdriver is also Ideal for electric drivers wanting to keep an eye on their motor, speedo, battery or tyre temperatures!
Other tool tips can be inserted into the blade end to suit your particular application.
Measurement Temp : -33 to 220 C (-27.4 to 428 F)
Resolution: 0.2 C (0.5 F)
Response: 1 Second
With the full set of HPI Pro-Series Tools at your side, you'll never need another tool again!
#101890 - Pro-Series Tools 1.5mm Allen Driver
#101891 - Pro-Series Tools 2.0mm Allen Driver
#101892 - Pro-Series Tools 2.5mm Allen Driver
#101893 - Pro-Series Tools 3.0mm Allen Driver
#101894 - Pro-Series Tools 5.5mm Box Wrench
#101895 - Pro-Series Tools 7.0mm Box Wrench
#101896 - Pro-Series Tools PH2 5.8mm Screwdriver
#101897 - Pro-Series Tools # 1 Flat Blade Screwdriver
#101898 - Pro-Series Tools Ultimate Tuning Screwdriver
#101899 - Pro-Series Tools 4.0mm Allen Driver
#101912 - Pro-Series Tools 5.0mm Allen Driver
#101913 - Pro-Series Tools Body Reamer
#101914 - Pro-Series Tools Pouch
#107263 - Pro-Series Tools PH1 3mm Cross Head Screwdriver
Download PDF instructions for #101898 (3.6 MB)