Team Driver Setups
Base Parking Lot Racing Setup
Parking lot, medium grip, medium size (less than 80 feet or 30m)
Front
35 wt oil, #3 pistons, Orange Linear springs
Lowered upper shock mount (comes with V12 LMR or GT-One bodies)
Bottom of shock mounted on C-Hub
10 degrees caster, 0 degrees kick-up
Set camber so tires wear flat
Toe-in: 0 degrees
Camber link in upper position on C-Hub
18mm ride height
Nitro Handling Set (2mm roll center plate) #72515
33R tires with Firm Pro Tire Strip inserts
Rear
280mm wheelbase
35 wt oil, #3 pistons, Orange Linear springs
Graphite rear shock tower #73003, shock mounted in outer hole
Bottom of shock mounted in outer hole on suspension arm
Set camber so tires wear flat
Toe-in: 2 degrees
Camber link in stock position on rear upright
18mm ride height
Nitro Handling Set (2mm roll center plate) #72515
33R tires with Firm Pro Tire Strip inserts
Engine
#1600 15SS engine with #72175 High Performance Air Filter and #A970 Header/Tuned
Pipe Set
Body
HPI BMW V12 LMR body #7512 and 280mm wheelbase
Adjust gearing with the single-speed clutchbells: more teeth for a longer straightaway and smaller track, less teeth for a small track. The car at full throttle should stop accelerating about 3/4 of the way down the main straight.
Use #A844 for more consistent braking, place fuel tubing between the brake plates for consistent action
Good luck racing!