Team Driver Setups
Kitade's Setup for the Narita GP racetrack in Japan
11/7/99
Weather: Cloudy
Track: Narita GP
Engine: HPI Nitro Star Pro 21R SC
Head Clearance: 0.3 + 0.2 + 0.2
Plug: 8f
Muffler:
Fuel: Byron's
Traction: High
Front Track: 253mm
Road Clearance: 5mm
Camber In: -1.5
Front Toe-In: -1
Front Tire: Red Star M35
Diameter: 64mm
Rear Track: 263mm
Road Clearance: 6mm
Camber In: -3
Rear Toe-In: -2
Rear Tire: Red Star M35
Diameter: 74mm
Front Up-Stop: 0
Rear Up-Stop: 6mm
Front Caster Position: 3mm
Rear Upper Arm Shim: 2mm
Front Stabilizer: stock
Adjuster Position: 55mm
Rear Stabilizer: stock
Front Shock Spring: Black
Shock Oil: #60
Piston: 4
Rear Shock Spring: Red
Shock Oil: #60
Piston: 5
2 Speed 1st Gear: 17/48
2 Speed 2nd Gear: 21/46
4WD Side Pulley: 26T
Body: HPI Lola #7580
Body Position from Bumper: 16mm
Spoiler Position above Body: 4mm
NOTE: Kitade modified the rear shock mounts by drilling an additional mounting hole 4mm below the stock hole. The center line of both holes is parallel to the edge of the shock mount and the diameter is 3mm.
Good luck racing!