Team Driver Setups
Kitade's Setup for the Boss Speed racetrack in Japan
11/14/99
Weather: Sunny
Track: Boss Speed
Engine: HPI Nitro Star Pro 21R SC
Head Clearance: 0.3 + 0.2 + 0.2
Plug: 7f
Muffler:
Fuel: Byron's
Traction: High
Front Track: 252mm
Camber In: -1.5
Front Toe-Out: +1
Front Tire: HPI 40 or Red Star M35
Diameter: 63mm
Rear Track: 263mm
Camber In: -3
Rear Toe-In: -2 or -1.5
Rear Tire: HPI 40 or Red Star M35
Diameter: 73mm
Front Up-Stop: -1 or -0.5
Rear Up-Stop: 3mm
Front Caster Position: 3mm
Rear Upper Arm Shim: 2mm
Front Stabilizer: stock
Adjuster Position: 55mm
Rear Stabilizer: 2.5 diameter or 3.0 diameter
Front Shock Spring: Red
Spring Adjuster Position: 3.2mm
Shock Oil: #45
Piston: 4
Rear Shock Spring: Red
Spring Adjuster Position: 0.5mm
Shock Oil: #45
Piston: 5
2 Speed 1st Gear: 17/48
2 Speed 2nd Gear: 21/47
4WD Side Pulley: 26T
Body: HPI Lola #7580
Body Position from Bumper: 16mm
Spoiler Position above Body: 7mm
NOTE: Kitade modified the rear shock mounts by drilling an additional mounting hole 4mm below the stock hole. The center line of both holes is parallel to the edge of the shock mount and the diameter is 3mm.
Good luck racing!