Team Driver Setups
Bill Martinez's Modified Setup (works at just
about any asphalt track with minor tweaks):
11/17/99
Front:
50 wt oil, #3 pistons, 1mm spacer, 65mm total length
Blue Linear springs, stock shock positions (A-1)
1 degree negative camber, 10 degrees caster, 0 degrees kick-up
Toe-in: 0 degrees
Camber link in stock position (U-2)
33R tires with Red (medium soft) inserts
Rear:
50 wt oil, #2 pistons, 1mm spacer, 65mm total length
Green Linear springs, stock shock positions (A-2)
1 degree negative camber, 2 degrees toe-in
Camber link in stock position (#2)
33R tires with Red (medium soft) inserts
2mm roll center spacer (allows use of softer springs in rear, more rear
traction)
Ride Height:
4.5 to 5mm front, 5mm rear
Team Orion Chrome 9 Double motor using #TM3003S brushes, 122/27 gearing
HPI Dodge Stratus body
LRP V7.1 ESC, no plug installed
This set-up is with saddle pack batteries. This setup works good for medium-bite asphalt surfaces. Bill races mostly at MnM hobbies in Corona, CA.
Good luck racing!