l-pro2.jpg (10877 bytes)

Team Driver Setups

back to main Setups page

Revelation Raceway
Dedicated on-road track, smooth surface, high grip, large size

Front
Pink Pro Linear springs (#6759)
40wt Team Orion shock oil
#3 piston setting
Firm shock bladder (#72112)
Lower arm mount hole "A"
8 degree C-hubs
Woven graphite shock tower (#73047) hole #1 top, hole "L" bottom
4.5 mm ride height
2 degree camber
Team Orion foam tires 37 shore (26mm)

Front C-hubs were modified by cutting off camber link mounts and using #A317 Rod Ends at the end of the turnbuckles instead of stock ball cups. Insert a #A132 Ball pivot in each rod end, then use a #Z059 countersunk flat head 15mm titanium screw to attach the ball/rod end where the top kingpin normally goes (the stock hex cap head screw). The effect of this modification was to make the turnbuckle "captured" and allow better camber change as the suspension compresses.

Rear
Pink Pro Linear springs (#6759)
60wt Team Orion shock oil
#3 piston setting
Firm shock bladder (#72112)
Lower arm mount hole "A"
2 degree hubs, hole #1
Woven graphite shock tower (#73048) hole #2 top, hole "L" bottom
5.5 mm ride height
2.5 degree camber
Team Orion foam tires 37 shore (30mm)

Rear turnbuckle connection to uprights modified similar to front C-hubs, except the uprights were not modified. This was to add a "captured" end to the turnbuckle.

Engine
Novarossi MR12 rear port SG shaft
Associated header
Novarossi 6802 pipe
McCoy MC 59 plug
HPI Power Fuel 30% fuel
Yokomo 3 shoe clutch (for SG shaft)
Yokomo flywheel/collet (for SG shaft)
Wolfpack Radicals adjustable engine mounts (WLF054)

Body/wing
HPI Stratus 200mm body (#7416)
Touring Car Wing set, 195mm wing (#7115)

Transmission
18/23 pinion gear (#76978/#76983)
39/43 spur gear (A445/#76843)
Wolfpack Radicals clutch type 2 speed (WLF061)

Gear box
Front one way (#86122)
Heavy Duty Gears for rear diff (#A856, #A857)
50,000 wt rear diff grease

Other
Wolfpack Radicals steering cranks (WLF065)
Fiber Brake Disk #A844 for more consistent braking, place fuel tubing between the brake plates (on the screws) for consistent action

Good luck racing!