July 2003
Week Four
Click here for the HPI Racer Gallery contest rules
|
|
This is my Savage 21, I call it the "PUNISHER" the paint job was done my buddy Andy from Crown hobbies, Miami, Fl. Its currently running on a Hyper 21-8 port, and some other cool looking parts. Hope you enjoy. Thanks, Javi |
|
attached are photos of my new RS4-3SS. I hope
you like my paint job as much as I do. I almost hate to use it,
(but how would I get another chance to paint something else).
Mark Corniuk San Jose CA |
||||||||||||
|
Hello everyone this is Timm ( ivansdad - on most r/c forum's ) and Ivan ( 5yr old son ) from West Palm Beach, FL where we race at are local club MDIracing.com. We try to race at all the HPI races, including the HPI World Challenge in Japan in which I attended, We currently have 11 different HPI car's or truck ready for racing at any time. This is the current breakdown: Ivans Rally: which was first used at the World Finals in California, it got his blessing after he jumped his first ramp in the driveway, his been hooked ever since, still has the orginal a-arms on the car. with a converted pro2 front-end, custom made carbon fiber upper-deck, novak esc, and a mercury fm receiver Ivan will race any time. Dad's Rally: converted from a Pro2, 200mm front end for offroad Rallying, double carbon fiber chassis, associated battery box, aluminum pullys, lot's of other aluminum, Novak esc, Novak receiver, all powered by a stock motor. Ivan's RTR3: which was won by me at the Orlando HPI challenge for 1st Amain nitro stock. This is now used for nitro stock racing. No mod's. Dad's Racer2: built for racing, carbon fiber everything, upperdeck, y-brace, shock tower's, and much more. SS fuel tank, Mugen MT-12 rear exhaust motor for the motor, and a paris tube pipe for the exhaust. Dad's Super: This is by far the best car to drive. carbon fiber shock tower, custom rear body mount, carbon a-arms, custom made Cvd's w/ dash outdrives. Mt-12 for power and a 1/8th scale pipe by mega for exhaust. Dad's Pro3: Boxstock for HPI races, cyclone esc and a novak receiver. Ivans's Pro3: Boxstock for Hpi races. GM V-12R esc and a Novak receiver. Dad's Savage: Just out of the Box, No mod's to date. Ivan's Micro rtr: upgraded front bumber, cvd's, aluminum outdrives. Dad'a Micro: GM v-4, airtronics receiver, front one-way, cvd's, upgraded front bumber. Dad's loaded Pro3: loaded is a under-statement all aluminum or penquin carbon fiber, aluminum shock body's, carbon a-arms, and much more. We both use the Airtronics M8 Radio and have enough spare part's to start our own Hobby Shop. Timm Wooley Can't wait for some more new HPI products.
|
||||||||||||||||||||
| |
|||||||||||||||||||||
|
|
Hi,
My name is Dimitri, I leave in France. Thanks! |
||||||||||||||||||||
| Hello, my name is Leonardo Carquez, I am in Venezuela and am trying to incurcionar in the world of the automodelismo (auto models). I have always tried to acquire products from HPI, but in this country it is dificult to find them. When I can I order to the United States, but I haven't been able to acquire of opportunity certain accessory like Rims, Bodies, and a Kit Nitro 1/10 of scale. Here is my HPI Lamborghini Diablo VT, 200mm with Super Star Wheels 26mm |
|||||||||||||
| |
|||||||||||||
| Hey HPI, My name is Kurt and i live in Sussex
WI. I am submitting photos of my Nitro MT. Upgrades include: 15SS
engine, lightweight 32mm flywheel, slipper clutch, MIP CVDs, racing
clutch, Hardened outdrives and diff gears, 4mm chassis, titanium
turnbuckles with RPM rod ends, and Traxxas header and .15 outlaw
pipe. I would like to say the nitro mt is awesome and keep making
great products. |
|||||||||||||
| |
|||||||||||||
| Hello Everyone, |
|||||||||||||
| |
|||||||||||||
| hi guys
my name is Edgar Maldonado from PR, I have just started in the R/C world I researched a lot before purchasing a kit. But after all determined HPI were the best value and the bodies are great. These are some pictiires of my Type SS. I purchased this kit about less than 6 months ago for parking lot fun and a new Dash for by kid " and waiting for it to arrive". I have put most of hotbodies aluminum hook ups. aluminum steering kit waiting for powerline alloy shock towers alloy front mount plate and handel set to arrive. Here are some pictures of my acura body, this one has not been run. Will send pictures of my M5, which I use to run, when my digital camera is replaced. Great job! |
|||||||||||||
| |
|||||||||||||
| Hey Guys, |
|||||||||||||
| |
|||||||||||||
| Hi, Im Seth Eversole Im 14, this is my first RC Car I ever had, Beneath this Purple Honda Civic is a Modified motor from Team Orion, Hpi Pro speed controller, 1 way diff in front, Ball diff in back, More upgrades on the way. Thanks for making such a great car! |
|
||||||||||||
| |
|||||||||||||
| Here are a few pictures of my truck that i race
with on sundays at my local track Trio Speedway in Radcliff , KY.
i currently have a HPI Chevy Silverado body that im running with
as you can see i had to modify the body some because it is made
for a nitro truck i also tryed all kinds of new tricks on this body
i dont know if the pictures show it or not but there are two ghost
flame licks on the hood on eather side of the main set of flames
the flames are then there are the silver fade tinted windows the
colors that i used are Pactra Indy Silver, Metallic Red, and for
the windows Window Tint well i hope you like my truck |
|||||||||||||
| |
|||||||||||||
| Hi my name is Miguel and I am from Chicago. I wanted to get my pictures in just in time for the 4th of July holiday I hope you like them. I have a HPI RS4 RTR Nitro with several hop-ups! They are MIP Shiny CVDs Universals, 2.5 mm thick purple chassis, Delrin 46 tooth spur gear , carbon fiber brake pads and steel brake wheel, OS CV-X Hyper Gold/Blue 10A .15 engine with HPI 2 speed transmission, HPI front mounted belt tensioner and side tensioner, HPI graphite front and rear arms and upper rear Y brace (not shown), ball bearing supported steel steering arms, and HPI roll center plates. Miguel Arce |
|
||||||||||||
| |
|||||||||||||
| Dear Hpi, Here are some pictures of my hpi nitro rs4 type |
|||||||||||||
| |
|||||||||||||
| Hello my name is MIchael Curley and
i am 12 I have a nitro rs4, I have 2 bodys a dodge ram and a honda.
I have had my car for half a year. Enjoy! |
 |
||||||||||||
| |
|||||||||||||
| this is my second completion on a car body i got some more decals
from a local store. ACURA RSX THE BEST BODY EVER!! |
|
||||||||||||
| |
|||||||||||||
| Hello This is my HPI RS4 2 kit with a new Eclipse body and most of the graphite upgrades. Thank you Jesse Chartier
|
|||||||||||||
| |
|||||||||||||
| My name is matthew gallo , i started this hobby
6 months ago. This is my 6th bodie and i really like the color schemes.
Thank you HPI for making these great bodies.
|
|
||||||||||||
| |
|||||||||||||
| William Chang |
|||||||||||||
| |
|||||||||||||
| Hi my name is Eddie Im 15 and I live in Puerto Rico and this is my HPI RS4 RTR 3 with a Mitsubishi Eclipse body, the car haves some hopups like 2 speed transmition, racing clutch, and aluminume headers and pipe. For the paint job I used Pactra Racing Finish paints, outlaw black, sprint white, brilliant blue, flourecent blue. This is my first nitro car and my second body and this car handles great and is wicked fast, I don't know how fast but still, it is fast thanks for doing a great job whith this car it awsome |
|||||||||||||
| |
|||||||||||||
| This is the Super Nitro that i race on a regular basis from april
to october. the silver body has been retired, however, the yellow/white
body is a constant sight on the track.....for reference i used
two pics of two different views on the actual #3 and #4 car of
the C-5 R. just recently was the 50th Anniversary Corvette celebration
in Nashville, TN. the yellow/white body has been retired due to
being signed by one of the drivers of the actual C-5 R. i think
both pics are awesome and hope you enjoy them as much as i enjoyed
taking them. |
|
||||||||||||
Think you can do better? See our R/C Photography Tips and send us your pictures!
Week Four