more pictures:
1

Frank Moskowitz

Cave Creek, AZ

more pictures:
1	2

Here are some pictures of my first real paint job. My car is an RS4 Rtr 3. It has 2spd, CVEC pipe, header, and various GPM Racing upgrades. Maybe next time I'll try something a little more detailed.

Chad

more pictures:
1	2	3

MODIFIED EXHAUST, CHECK IT OUT WWW.JUSTNITRO.CJB.NET

Shyam Bhanderi

This is my civic that i just painted. Its a 2 speed transmistion RS4 3 kit.
My name is Thomas Kamenos and I live in california

more pictures:
1	2	3

Hello people at HPI, first and foremost I have to thank you guys for making such a great rc! Here in Calgary winters are long and indoor tracks are few (almost non-existant)... this is where Micro comes to the rescue!!!
I really like the DTM body, its in my opinion the nicest car ever! Here some pictures of my car with the lights on.

Hugh
Calgary Alberta, Canada

more pictures:
1	2

This was the first paint job I ever did!!!!

 

more pictures:
1	2	3	4

My name is Chris S from bridgewater New Jersey.
hear are some PICS of my nitro rush that I had for about a year and a half. It has a .15ss engine in it with a duratrax exost header and a cvec tunable pipe. It also has a graphite upper deck, all new springs and shock oil, hi torque steering servo, high flow air filter, aluminum rear brace, a set of on road tires and offset rims, a team associated body, custom made grille lights, titanium turnbuckles, purple hardware, thicker fuel tubing and a home made wire grille.

more pictures:
1	2

Hello here are some pics of my Savage. I haven't done much to it yet ( I haven't had it very long). I replaced all the dogbones with CVD's from Hot Bodies. I also replaced the brake with a Hot Bodies replacement. I use a Motorsaver fuel filter and a Great Planes fuel filter. It rolls on a set of Pro-line Velocity 6's with Big Joe 40's. I topped it with a Pro-line Chevy panel Wagon. I painted it with rattle cans. Hope you like it I REALLY DO!!

Edward B. Orca Jr

Hollister, California

more pictures:
1	2

This is my first Gas RC car, and ever since I bought it, I loved it.

HPI Nitro RS4 3 Type-SS, still stock. I was going for the JDM look on this car.

I hope you guys enjoy the pictures I attached to this email, and that they’re good enough to be include on your site and entered in the competition.

Anyways, have a good one.

NRG, CA

more pictures:
1

My name is Andrew Somali I'm 13 years old and this is my Pro3 with a Honda civic SI bodie on it.Some Hop-Up parts i have on there is a carbon fiber chasis, middle shaft mount,and a heat sink motor plate.I have a P-94 motor 10 turns, my speed control is a Ko Propo KSC-1000 and a airtronics sport bazer for my conrol .I bought this car in October and this is the best car ever bought thanks HPI.

more pictures:
1

Hello, my name is Tim Zewatsky from Milford Michigan. I have recently gotten the rc bug. This is my first kit although I have painted a few other bodies. So far my rs4 3 ss is stock, waiting for warmer weather to break it in and I'll go from there.I enjoy the HPI support, keep up the good work.

The colors are Parma Fastflip sapphire backed with pearl black, accents are: allclad chrome, testor racing red, outlaw black, and a mixed red and orange (for amber). It's hard to tell in the photos but the main body will change from brilliant blue through violet to black depending on the type and intensity of lighting. Look for more to come in the future!

 

more pictures:
1	2	3	4

My name is Trevor. I am 12 years old and live in San Jose, California. I love racing my car, a HPI Sport 2 kit.

more pictures:
1

My name is mark from las vegas and i am the biggest hpi fan, here are just some of my cars that i have built and race,,,,, enjoy. All these cars are highly modified with every hpi mod you can think of. I spent all last summer making and racing these . I am the ultimate hpi fan

more pictures:
1	2	3	4

Nino Lazetic

 

Here a picture of my savage21.it has hotbodies upgrades & lexas,proline bodys,fm receiver,hitec high torque steering servo & 40's proline rims,big joe tire,new era lower & upper arms

more pictures:
1	2

from "Hircc200sx"

here is a better picture of my car.stratus body named the gambler,the car is equipped with a big block,6 cell,610 novak esc, micro servo,hpi stocks on the front,softs on the back,concourse accessory kit,hpi lighting kits 2(one for the ground effects and the other as headlights and taillights,car is 140mmset on the skinny tire marks,what an awesome car.best bang for you buck.thank you hpi for something that is really reliable and fun for its size.all the best shaun.

more pictures:
1	2

John McGuire

Hello,

Here's a few pictures of my Nitro MT. Great truck and tough as nails! My modifications to date are as follows:

HPI Superstars
Powerline Aluminum Steering Assy
Megatech Stainless Steel Brake
HPI Nitro RS4 3 Type SS header (ported)
Motorsavers Filter
HPI Titanium Turnbuckles
HPI Stainless Steel Hinge Pins
Ofna Slide Carb Linkage
RPM Heavy Duty Ball Cups
Associated 40W Shock Oil
Duratrax Bearings in Clutchbell.

This is a top notch kit and I'm never disappointed with the
performance and durability. Keep up the good work!

Don G.

more pictures:
1	2

Hey everyone, this is ExtremeMT from the old HPI forums and the current RRCA forums. Here is my HPI Nitro MT. I got it 3 years ago when I was 12. It was my first R/C vehicle ever besides what I got from Toys R Us. I have been very happy with it and it's Durability. Besides what you can see in the pics I have a 15 tooth clutchbell, racing clutch, fiber brake disc and lightweight flywheel all HPI products. Yall make great products that are durable, long lasting, and have a huge fun factor. Keep up the good work, I plan on getting a Savage soon and I'll post pics of it when I do :) .

David Cook
Tallahassee Fl

more pictures:
1

Here are some pictures of my HPI Savage21 truck. Although it is mostly stock right now, I am very proud of the Bolink Avalanche body that I have painted. Although my 1:1 scale Avalanche is Forest Green Metallic, I decided to go for something a little more eye catching with the Savage. I went with Pactra flourescent yellow backed with basic white for the main body and charcoal pearl metallic for the cladding. All the lights and graphic are airbrushed, with the graphics done in a "ghost" phase change gold, orange, red, and purple paint. The Savage has a Venom Failsafe unit and HPI High Performance Air Filter. I hope that you find the pictures good enough to be shown in the gallery.

Thank you for your time,

Derek Marquardt

more pictures:
1	2	3	4