Savage Power with Electric Convenience!
For durability and ease of use, the
dual-battery, dual-motor electric E-Savage can't be beat! Full-time
4WD and Savage design place it well above any other electric
monster truck you can find today! The E-Savage is completely
pre-built with and equipped with an electric drivetrain for total
ease of use, tough build quality and outstanding power and
performance! There's no easier or fun way to get into the world of
off-road electric monster trucks! Simply charge and go!
- Completely ready to run (RTR) - just supply 8 AA batteries forthe transmitter
- Twin motors, electronic speed control and all radio equipment installed
- Two batteries and twin-charging GT Escape battery charger included
- Painted and trimmed bodyshell included for instant custom looks
- Pre-glued all-terrain tyres grip every surface
- Full manual included for easy repairs
- Twin GT550 Electric Motors have loads of grunt and top speed muscle
- Twin 3300 mAh Ni-MH rechargeable battery packs for long runtimes
- GT 14.4v electronic speed control with reverse for suburbcontrol
- Adjustable Twin Plate Slipper Clutch for extra drivetrain durability
- Durable TVP (Twin Vertical Plate) aluminium chassis
- 22 high efficiency ball bearings provide maximum efficiency
- 8 long-stroke oil-filled shocks soak up all bumps and jumps
- Double wishbone fully independent suspension for great handling
- 14mm hex hubs, compatible with standard Savage wheels and tyres
THE FIRST ELECTRIC POWERED SAVAGE
MONSTER TRUCK! Electric power is the easy way to get into
off-road monster trucks. Charge up, switch on, and enjoy the ride.
The E-Savage captures that ease and adds the proven durability and
extreme off-road capabilities of the famous line of Savage trucks.
You need a tough and powerful truck to handle electric off-roading,
and the E-Savage delivers. TWIN VERTICAL PLATE
CHASSIS The Twin Vertical Plates (TVP) chassis design was
inspired by the time-tested durability of our Savage line. Twin
Vertical Plates serve as the stable core of the chassis design,
providing the critical strength needed to stand up the abuse of
hard off-road driving. The rigid aluminium TVP chassis has a
stylish design that places the front, rear and centre gear boxes
between two upright aluminium plates. With the V-shaped battery
layout (VBL) we have placed the batteries (the heaviest items on
the truck) at the lowest possible position to make the centre of
gravity very low for quick and precise handling.
SYMMETRICAL 4WD LAYOUT The E-Savage has a
symmetrical power train layout with twin motors located around the
centre and twin batteries on the left and right sides of the
chassis. This layout creates excellent chassis balance to
contribute to great drivability on rough terrain and stability in
high-speed driving. Full-time 4WD puts the power to the ground at
all four corners, with 8 oil-filled shocks to soak up the bumps.
The result is a real go-anywhere monster truck. TWIN MOTORS
& TWIN BATTERIES Two high-power 550-size motors come
pre-installed, giving the E-Savage the power you need for off-road
action and wheelies on command. Each motor has a cooling fan inside
so they run cool and generate high power. Two 3300 mAh 7.2V
rechargeable Ni-MH battery packs are included for 14.4 volts of
electric off-road power. And, the included GT Escape charger allows
both batteries to be recharged at the same time. ELECTRONIC
SPEED CONTROL! The E-Savage comes equipped with an
easy-to-use electronic speed control to handle the twin motors and
twin batteries. The GT Speed Control delivers fully proportional
throttle control and has built-in reverse to power you out of
sticky situations. The FASF (Fully Automatic Setup Function)
automatically sets up the speed control, no adjustments necessary,
just plug in and drive. A large purple anodized alloy heat sink and
electronic overload prevention circuitry automatically protects the
ESC from overheating. TWIN PLATE SLIPPER CLUTCH A
high capacity twin plate slipper clutch is attached to the spur
gear to protect the drive system from impact while jumping. Placing
the spur gear between two slipper disks helps the drive train
handle the power of the twin motors and can be adjusted to track
conditions. COMPLETE SET OF BALL BEARINGS Twenty
two precision manufactured ball bearings are used in the drive
train to reduce maintenance and efficiently transmit the power of
twin motors and twin batteries to the tyres. WHEELS AND
TYRES Big 5.4 inch diameter tyres easily climb over
fist-sized rocks. The block pattern of the tread ensures long life
and stable grip on dirt and paved surfaces. The tyres are wrapped
around high gloss chrome wheels, pre-glued with inner foams
pre-installed. The wheels and tyres are compatible with a huge
variety already available on the market for the Savage, so
customizing your E-Savage is easy.
FEATURES
- Completely Ready to Run
- Twin GT550 14.4V Electric Motors
- Twin 3300 mAh Ni-MH rechargeable battery packs
- Includes a GT Escape quick charger, capable of charging two batteries at a time
- HPI TF-3 super narrowband AM transmitter with changeable frequency crystals
- Pre-painted and trimmed body
- Twin Plate Slipper Clutch
- Electronic speed control with reverse
- Durable TVP twin vertical plate aluminium chassis
- High efficiency ball bearings
- 8 long-stroke oil-filled shocks
- Double wishbone fully independent suspension
- 14mm hex hubs, compatible with standard Savage wheels and tyres
RTR
E-Savage with pre-painted bodyshell. Comes with everything you need
to get started, including detailed instructions manual and
comprehensive HPI RC Cars DVD. 505 - RTR E-Savage with ATV
bodyshell 508 - RTR E-Savage with Baja TT bodyshell 548 - RTR
E-Savage with GT Truck bodyshell
Specification may be subject to change