Nitro Star T-15 Engine with
Pullstart
#15101
You'll lover our Nitro Star T-15 engine! The standard engine in our Nitro MT 2, Rush Evo and Nitro 3 Evo kits, we've found the perfect blend of easy tuning and maintence, blend of reliability and loads of power!
- 1.2 horsepower!
- ABC construction
- Side exhaust
- Black case
- Tall heatsink head
- Aggressive porting
- Standard shaft
| Displacement: | .15 (2.49cc) |
| Horsepower @ RPM: | 1.2hp @ 29,000 RPM* |
| Bore: | 15.0mm |
| Stroke: | 13.6mm |
| Carburetor: | Rotary type, 6.0mm |
| Ports: | 3 |
| * These figures are estimates from the manufacturer of the engine. Like most R/C car companies, HPI purchases engines from model engine manufacturers, we do not have a testing lab or dyno to rate our engines. | |
Equipped with a convenient pullstarter, the T-15 will also accept our #87120 HPI Roto Start System! This engine will easily directly into any nitro car or truck that accepts small block (.12-.15) engines with pullstarters.
Available Now!
| #15101 | Nitro Star T-15 Engine with Pullstart |
$110.00 |
|
| NEW SPARE PARTS | |||
| 15110 | 1 | CYLINDER/PISTON SET | 59.00 |
| 15111 | 1 | CYLINDER/PISTON/CONNECTING ROD SET | 65.00 |
| 15112 | 1 | CONNECTING ROD | 13.00 |
| 15113 | 1 | PISTON PIN/RETAINER SET | 5.00 |
| 15114 | 2 | RETAINER FOR PISTON PIN (2pcs) | 3.00 |
| 15115 | 1 | CYLINDER HEAD | 28.00 |
| 15116 | 1 | UNDERHEAD | 18.00 |
| 15117 | 1 | GASKET FOR CYLINDER (0.1mm/1pc) | 3.00 |
| 15118 | 1 | CRANKCASE | 32.00 |
| 15119 | 1 | BALL BEARING 10x19x5mm (6800 2RS/FRONT) | 11.00 |
| 15120 | 1 | BALL BEARING 10x19x5mm (6800 OPEN/REAR) | 11.00 |
| 15121 | 1 | CRANKSHAFT (STANDARD SHAFT) | 30.00 |
| 15126 | 1 | PULLSTART ASSY. (w/o ONE-WAY BEARING) | 26.00 |
| 15127 | 1 | COVER PLATE SET (ROTO STARTER/PULLSTART) | 25.00 |
| 15128 | 1 | COVER PLATE | 15.00 |
| 15129 | 1 | STARTING SHAFT | 15.00 |
| 15130 | 1 | STARTING PIN/PRESSURE SPRING | 3.00 |
| 15131 | 1 | LOCK PIN FOR CARBURETOR | 5.00 |
| 15132 | 1 | DUST PROTECTION AND O-RING COMPLETE SET | 10.00 |
| 15133 | 1 | ONE WAY BEARING FOR STARTER | 18.00 |
| 15160 | 1 | ROTARY CARBURETOR COMPLETE (5.5mm) | 49.00 |
| 15165 | 1 | ROTARY CARBURETOR MAIN BODY | 15.00 |
| 15167 | 1 | MIDRANGE NEEDLE VALVE | 7.00 |
| 15169 | 1 | ROTARY VALVE (5.5mm) | 11.00 |
| 15170 | 1 | THROTTLE ARM AND NUT SET | 3.00 |
| EXISTING SPARE PARTS | |||
| 1468 | 1 | WASHER SET FOR FUEL LINE FITTING | 4.00 |
| 1470 | 1 | MAIN NEEDLE VALVE HOLDER | 7.00 |
| 1471 | 1 | MAIN NEEDLE | 6.00 |
| 1472 | 1 | MAIN NEEDLE/FUEL INTAKE SET | 19.00 |
| 1473 | 1 | FUEL LINE FITTING/WASHER SET | 17.00 |
| 1474 | 1 | IDLE ADJUSTMENT SCREW w/ SPRING | 5.00 |
| 1504 | 1 | GLOW PLUG COLD R5 | 6.00 |
| 1662 | 8 | SCREW SET (8 pcs) | 4.00 |
| 72140 | 1 | AIR CLEANER 30mm | 5.00 |
| A804 | 1 | COLLET 7x5mm | 2.00 |
| Z420 | 12 | CAP HEAD SCREW M2.6x6mm (12pcs) | 2.00 |
| Z544 | 6 | CAP HEAD SCREW M3x12mm (6pcs) | 2.00 |
| EXISTING OPTION PARTS | |||
| 1502 | 1 | GLOW PLUG MEDIUM R3 | 6.00 |
| 1503 | 1 | GLOW PLUG MEDIUM COLD R4 | 6.00 |
| 72175 | 1 | HIGH PERFORMANCE AIR CLEANER (10mm) | 16.00 |
| 87120 | 1 | HPI ROTO START SYSTEM (FOR NITRO STAR 12/15/18 PULLSTART) | 55.00 |
| 87121 | 1 | BACK PLATE UNIT FOR NITRO STAR 12/15/18 PULLSTART | 18.00 |
| A249 | 1 | BALL M2x3.8x4.5mm (4pcs) | 5.00 |
| Z662 | 1 | LOCK NUT M2 (4pcs) | 4.00 |