Nitro Star Pro 12R XS
with SG crankshaft
#1300
Now available from HPI Racing is an "SG" shaft version of the powerful Nitro Star 12R XS engine. The SG shaft is becoming popular at the highest level of competition because it has fewer parts and is stronger than standard shafts. This new engine bolts into our National Champion R40 nitro touring car without any additional parts.
|
|
| Displacement: | .12 (2.11cc) |
| Horsepower @ RPM: | 1.35hp @ 38,000 RPM* |
| Bore: | 13.8mm |
| Stroke: | 14.0mm |
| Carburetor: | Slide type, 5.5mm |
| Ports: | 3 |
| Weight: | 190g without standard glow plug, taper collar or exhaust |
| * These figures are estimates from the manufacturer of the engine. Like most R/C car companies, HPI purchases engines from model engine manufacturers, we do not have a testing lab or dyno to rate our engines. | |
Includes a dual-element pre-oiled air filter and nylon straps!
HPI Nitro Star engines have a 2 year limited warranty. Read our Nitro Star Engine Warranty
| #1300 | Nitro Star Pro 12R XS Engine (SG
Shaft/no pullstart) |
$209.00 |
| #1301 | Nitro Star Pro 12R XS Engine (Normal Shaft/no
pullstart) |
$209.00 |
|
|
||
| SPARE PARTS |
|
|
| #1310 | Piston/Chromed Cylinder |
$50.00 |
| #1311 | Piston/Cylinder/Connecting Rod Set |
$85.00 |
| #1314 | Underhead (Standard Plug) |
$15.00 |
| #1315 | Gasket Set For Cylinder (3pcs) |
$3.00 |
| #1316 | Connecting Rod |
$31.00 |
| #1317 | Piston Pin/Retainer Set |
$5.00 |
| #1318 | Retainer For Piston Pin (2pcs) |
$3.00 |
| #1319 | Crank Case |
$75.00 |
| #1321 | Ball Bearing 7x19x6mm (Front) |
$5.00 |
| #1322 | Ball Bearing 12x21x5mm (Rear) |
$16.00 |
| #1323 | Lock Pin for Carburetor |
$8.00 |
| #1324 | Crank Shaft (SG Shaft/ No Pullstart) |
$45.00 |
| #1326 | Crank Shaft (Standard Shaft/ No Pullstart) |
$45.00 |
| #1328 | O-Ring for Cover Plate |
$2.00 |
| #1329 | Cover Plate with O-Ring |
$7.00 |
| #1332 | Cylinder Head |
$34.00 |
| #1334 | O-Ring Complete Set |
$5.00 |
| #1360 | Slide Carburetor Complete |
$42.00 |
| #1365 | Slide Carburetor Main Body |
$25.00 |
| #1366 | Low Speed Needle Valve With O-Ring |
$5.00 |
| #1367 | O-Ring 2x5x1.5mm (3pcs) |
$2.00 |
| #1368 | Uniball |
$6.00 |
| #1369 | Dust Protection Boot |
$3.00 |
| #1370 | Slide Valve |
$13.00 |
| #1371 | O-Ring 2.4x4.4x1mm (2pcs) |
$2.00 |
| #1372 | Mid Range Needle Valve With O-Ring |
$6.00 |
| #1373 | Main Needle With O-Ring |
$6.00 |
| #1374 | Main Needle Valve Holder |
$8.00 |
| #1375 | Idle Adjustment Screw With O-Ring |
$6.00 |
| #1376 | Fuel Line Fitting |
$3.00 |
| #1377 | O-Ring For Carburetor Body (2pcs) |
$2.00 |
| #Z420 | Cap Head Screw M2.6x6mm (12pcs) |
$2.00 |
| #Z545 | Cap Head Screw M3x15mm (6pcs) |
$2.00 |
| #Z701 | Set Screw M3x4mm (6pcs) |
$2.00 |