Nitro Star 18SS Engine with Pullstart |
#1617
Check out
our Nitro Star 18SS engine! This high torque, super powerful engine is
perfect for "outlaw" class racers and hobbyists looking for
a reliable high power engine that is easy to maintain and tune.
Specification
| Max RPM: |
40,000rpm |
|
|||||||||||||
| Bore: | 16.4mm | ||||||||||||||
| Stroke: | 14mm | ||||||||||||||
| Torque: | not available from manufacture | ||||||||||||||
Rated at 1.5 horsepower, this is easily one of the most powerful small block engines on the market today!
- 1.5 horsepower!
- ABC construction
- 5.5mm rotary carb
- Side exhaust
- Black case
- Tall purple anodized billet aluminum heatsink head
- Aggressive porting
- Standard shaft
The 18SS is an excellent match for any truck that will accept a small block (.12-.15 size) engine with pullstarter, and has also been tested at 60mph in HPI nitro touring cars! Equipped with a convenient pullstarter, the T-15 will also accept our #87120 HPI Roto Start System!
| #1617 | Nitro Star 18SS Engine with Pullstart |
$239.00 |
|
| NEW SPARE PARTS | |||
| 1794 | 1 | HEATSINK HEAD 50x39mm (PURPLE) | 65.00 |
| 1795 | 1 | GASKET SET | 4.00 |
| 1796 | 1 | CYLINDER AND PISTON SET | 45.00 |
| 1797 | 1 | PISTON PIN | 6.00 |
| 1798 | 1 | CRANK CASE (BLACK) | 40.00 |
| 1799 | 1 | ROTARY CARBURETOR 6.0mm (COMPLETE/BLACK) | 55.00 |
| EXISTING SPARE PARTS | |||
| 1657 | 1 | COVER PLATE (PULL STARTER) | 7.00 |
| 1662 | 8 | SCREW SET (8 pcs) | 4.00 |
| 1664 | 1 | CRANK SHAFT BEARING (FRONT) | 11.00 |
| 1665 | 1 | CRANK SHAFT BEARING (REAR) | 11.00 |
| 1668 | 1 | PULL STARTER (NO ONE WAY BEARING) | 18.00 |
| 1669 | 1 | ONE WAY BEARING | 18.00 |
| 1671 | 4 | SCREW SET (4 pcs) (PULL STARTER) | 2.00 |
| 1672 | 1 | CARBURETOR (MAIN BODY) | 35.00 |
| 1673 | 1 | ROTOR SET (CARBURETOR) | 18.00 |
| 1674 | 1 | ROTOR SPRING | 1.80 |
| 1675 | 1 | ADJUST SCREW SET (WITH SPRING) | 2.80 |
| 1676 | 1 | SCREW FOR ROTOR GUIDE | 3.50 |
| 1677 | 1 | THROTTLE ARM SET | 3.00 |
| 1682 | 1 | CARBURETOR GASKET SET (4 pcs) | 2.50 |
| 1683 | 1 | THROTTLE ARM BOOT | 1.70 |
| 1685 | 2 | RETAINER FOR PISTON (2pcs) | 8.00 |
| 1686 | 1 | LOCK PIN FOR CARBURETOR | 3.50 |
| 1705 | 1 | GLOW PLUG | 7.00 |
| 1733 | 1 | CRANK SHAFT (PULLSTART) | 48.00 |
| 1737 | 1 | CONNECTING ROD | 18.00 |
| 1751 | 1 | NEEDLE VALVE HOLDER | 9.00 |
| 1752 | 1 | NEEDLE | 9.00 |
| 1757 | 1 | STARTING SHAFT | 6.00 |
| 72140 | 1 | AIR CLEANER 30mm | 5.00 |
| EXISTING OPTION PARTS | |||
| 72175 | 1 | HIGH PERFORMANCE AIR CLEANER (10mm) | 16.00 |
| 87120 | 1 | HPI ROTO START SYSTEM (FOR NITRO STAR 12/15/18 PULLSTART) | 55.00 |
| 87121 | 1 | BACK PLATE UNIT FOR NITRO STAR 12/15/18 PULLSTART | 18.00 |
| A249 | 4 | BALL M2x3.8x4.5mm (4pcs) | 5.00 |
| A804 | 1 | COLLET 7x5mm | 2.00 |
| Z662 | 4 | LOCK NUT M2 (4pcs) | 4.00 |