이 제품은 아래의 키트 / 제품에 적합합니다:

아래의 제품은 단종된 키트 입니다

#102491 - HPI SF-20 SERVO (HIGH TORQUE/6.6kg-cm 6.0V)

High Torque Servo/25 Spline

Discontinued, replacement part: #104109

Standard Parts

New from HPI is the high torque SF-20 Servo. The SF-20 is a high-performance upgrade to the SF-1 servo, and a direct replacement for the SF-2 servo found in many HPI car and truck kits.

Specs:
6.0V Speed: 0.17sec/cm
Torque: 6.6kg/cm
High Torque
25-tooth Spline

NOTE: NOT WATERPROOF! Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts. 

Download PDF instructions for #102491 (0.2 MB)

지역선택:

언어선택:

Get more HPI! Login to MYhpi now!

지역 및 언어 설정을 선택하세요