l-snitro.jpg (14060 bytes)

Specifications Sheet

Main Super Nitro RS4 Page | Manual | Parts List | Option Parts | Building Tips | Racing Tips | Updates | Nitro FAQ

 

without body

with body (measurements will vary depending on the body installed)

Length 435mm or 17" 490mm or 20"
Weight 1470g or 3.2 lbs 1600g or 3.5 lbs (no electronics)
Weight, RTR 1690g or 3.7 lbs 1800g or 4 lbs (with electronics, approximate)
Ride Height 13mm or 1/2" 5mm or 3/16" (measured from ground to bottom of chassis or body, approximate)
Front Track 193mm or 7 9/16" (measured at center of tire)
Front Width 225mm or 8 7/8" 228mm or 9" (measured at outside of tire)
Rear Track 193mm or 7 9/16" (measured at center of tire)
Rear Width 225mm or 8 7/8" 230mm or 9" (measured at outside of tire)
Wheelbase 280mm or 11 1/16" (short wheelbase, measured at center of axle)
  300mm or 11 7/8" (long wheelbase, measured at center of axle)
Fr. Shock Length 53.5 (measured from center of shock pivots)
Fr. Shock Stroke 45 to 56mm
Rr. Shock Length 53.5mm (measured from center of shock pivots)
Rr. Shock Stroke 45 to 56mm
Front Wheels 2.2" (57mm) x 35mm wheels with 12mm hex adapter, high impact nylon
Rear Wheels 2.2" (57mm) x 35mm wheels with 12mm hex adapter, high impact nylon
Front Tires 57mm inner diameter (ID) M Compound Racing Slick tires
Rear Tires 57mm inner diameter (ID) M Compound Racing Slick tires
Front Caster 10 degrees, adjustable to 8 degrees
Camber/Front Toe Adjustable turnbuckles
Rear Toe 2 degrees toe-in
Gear Ratio 2.16 (39T diff pulley, 18T gear shaft pulleys)
Gear Ratio 44T spur and 13T clutchbell, single speed
Differential Type Enclosed Metal Bevel Gear
Chassis Type Purple anodized aluminum, countersunk