Specification Sheet
Main Rush Evo Kit Page | Parts List | Instructions | Option Parts | 1/10 scale truck Forum
| Length | 400mm or 15 3/4" | (total length, from front bumper to rear battery pack holder) |
| Weight | ~ 1.9kg or 4.8 lbs | (with electronics, approximate) |
| Front Width | 325mm or 12 3/4" | (Measured at outside of tires) |
| Rear Width | 325mm or 12 3/4" | (Measured at outside of tires) |
| Height | 155mm or 6 1/8" | (Measured to top of body) |
| Wheelbase | 284mm or 11 3/16" | |
| Fr. Shock Length | 87mm maximum | |
| Fr. Shock Stroke | 62mm | |
| Rr. Shock Length | 103mm maximum | |
| Rr. Shock Stroke | 70mm | |
| Front Wheels | 2.2" Type F5 Wheels | (NOTE: the Nitro Rush front wheels take 3/16 x 3/8 x 1/8" bearings) |
| Rear Wheels | 2.2" Type F5 Wheels, with hex adapter | |
| Front Tires | 2.2" | (Any Pro-Line or Team Losi truck tires will fit) |
| Rear Tires | 2.2" | (Any Pro-Line or Team Losi truck tires will fit) |
| Front Caster | 30 degrees (kick-up in chassis) | |
| Caster/Front Toe | Threaded Rods | |
| Rear Toe | 2 degrees toe-in at rear arm mounts | |
| Gear Pitch | 1M (metric) | |
| Gear Ratio | 56T spur and 13T pinion | |
| Differential Type | Metal Bevel Gear | |
| Chassis Type | Black Anodized 6061 Aluminum, 2.5mm thick | |
| Pipe and Header | Plastic 2-chamber tuned pipe with one-piece aluminum tube header |
The rear axles of the Nitro Rush Evo take hex adapters out of the box. The hex adapters fit over the axles and spring pins, but the hex adapters can be removed so that Associated 10T, T2 or T3 wheels can fit on the axle. Losi XXT wheels will also fit on the MT axles if you remove the hex adapters.