To the Main Assembly Instructions Page
Finally, you get to paint and mount the body that came with your kit!
Step 31
After painting the body, use your hobby knife (which should still be sharp) to scribe the wheel wells of the body. Even standard curved scissors are a little too large to cut out wheel wells without a bit of practice.
After scribing the line a couple of times, you can bend the plastic a little and start the break in the polycarbonate. Then you can pull out the rest of the wheel well and use your curved or straight scissors to cut out the rest of the body.
Use a reamer or drill to make the body mount holes in the body, as well as the wing mount holes.
You can use any of the three wing mounts you wish, we recommend that you have the wing angle forward (but you can "be different" if you want and angle it to the rear!).
After mounting the wing, this is what you should see:
Mount the body on with the body clips we've provided and you're finished!
Now get out and play with your Micro!