Assembly Instructions - Page 20, Step 29
To the Main Assembly Instructions Page
In this step we will install the foam bumper and the body posts.
Step 29
Press on the foam bumper over the front mounts. Make sure the angle side of the bumper is on the bottom.
Slide the front (short) body posts into the mounts.
Slide the body clips through the same holes on the left and right side posts.
Use these settings
for the front body posts - counting from the top, this is the hole the
clip should go through:
Dodge Viper GTS-R Body: 8th hole from the top
BMW M3 Body: 9th hole from the top
Nissan Skyline R34 GT-R Body: 10th hole from the top
Slide the rear body posts into their mounts
Slide the body clips through the same holes on the left and right side posts.
Use these settings
for the rear body posts - counting from the top, this is the hole the
clip should go through:
Dodge Viper GTS-R Body: 12th hole from the top
BMW M3 Body: 11th hole from the top
Nissan Skyline R34 GT-R Body: 10th hole from the top
