Assembly Instructions - Page 18, Step 27
To the Main Assembly Instructions Page
Here's where we get to mount the tires. We're closer to running the car!
Step 27
Install each tire as shown, making sure that the writing on the sidewall faces the outside of each wheel. The tires are directional and have different height sidewalls on the inside and outside, so it's important that they are installed correctly.
The outside of each tire should look like this.
The inside of each tire should look like this.
Wait a few minutes for the tires to return to their normal shape. After being stretched, there may be gaps between the rubber tire and the plastic wheel.
Using the CA bottle with a needle tip or precision applicator installed, pull back the sidewall slightly on the outside of the tires and apply some thin CA glue between the tire and wheel. Let it set briefly, then rotate the tire and apply the glue in another spot.
On the inside sidewall of the tire, pull back the tire a little and apply the CA glue the same way as on the outside.
