Assembly Instructions - Page 16, Step 21

To the Main Assembly Instructions Page

This step will install the upper deck to the car.

Back to Step 20

Step 21

First, fit the front right suspension arm into the upper bulkhead.

Then push the whole assembly into place in the front bulkhead.

This is what the car will look like before attaching the hinge pins.

Slide in the first hinge pin, passing it through the hinge pin brace and the bulkhead.

Slide in the remaining hinge pin, making sure it goes through the hinge pin brace.

Finally, attach the rear end of the upper deck with two flat head screws.

On to Step 22!