Assembly Instructions - Page 11, Step 11
To the Main Assembly Instructions Page
Assembly and installation of the front bulkhead is next!
Step 11
Install the belt guide mount onto the front bulkhead with one of the flat head self-tapping screws.
Using a 1.5mm Allen wrench or the L-wrench included with the kit, attach the belt guide bushing with the self-tapping step screw. Make sure the bushing spins freely. If it does not, loosen the step screw a little until you can easily spin the bushing.
Attach the bumper and front bulkhead with the flat head screws. Screw in the front screws first, this hold the bumper on also. This lets you install the other three screws without having to worry about holding the bumper in place.
