The Proceed is the
first 1/8 scale racing kit from HPI Racing. For serious racers looking
for the ultimate in speed and tuning capability, look no further! This
is the kit to have.
Capable of 0-60 in
less than 3 seconds on the way to a top speed in excess of 70 mph, the
Proceed is not for the faint of heart! This is a kit for the truly hard-core
racer who wants to experience the most demanding on-road R/C racing experience.
With A final races routinely an hour long at most club events, 1/8 scale
on-road racing is a very rigorous and exacting hobby!
are pictures of the production version of the new HPI Proceed, our car
that will compete against the likes of the Serpent Vector, Picco Integra
and Mugen Avance/MRX cars! The 1/8th scale racing class has long been
considered the "Formula 1 of R/C racing", and with cars like
the Proceed, it's very easy to see why! This is a very serious racing
car, easily capable of speeds in excess of 70mph.
Proceed features a 5mm thick 7075S aluminum chassis, 2.5mm thick woven
graphite radio deck (this is optional on other 1/8 scale cars), quick-change
front and rear wheels, double wishbone suspension, dual kingpin pivot
balls for the front and rear uprights, adjustable front swaybar, thick
steel brake disk with fiber disk pads, and threaded shock bodies for quick
ride height adjustment.
(of prototype car):
Total length (without body): 442mm
Total width: 262mm
Main Chassis: 5mm 7075S anodized aluminum, front end is angle-cut
Upper Deck/Radio Plate: 2.5mm woven carbon graphite (standard)
Triple belt 4WD system, middle belt has bearing belt tensioner
Solid rear axle
Front one-way diff
Available without engine only (requires a .21 size rear-exhaust
Two speed transmission standard (features dual clutch shoes)
Innovative new flywheel system
ball bearings throughout the car, center mounted steering servo with turnbuckle
toe-in adjustment and a heavy-duty servo saver, balanced radio plate design
with a center-mounted receiver pack, center-mounted fuel tank with built-in
fuel baffles to prevent fuel foaming, sliding-type adjustable front swaybar,
thick rear sway bar, floating rear body mount, easy shock mounting system
with Allen screws and pivot pins, no e-clip pivot joints for all suspension
hingepins, adjustable front caster with easy to use clips, and new six-spoke
wheels with easy access to suspension adjustment screws!
Proceed will be a major factor in the ultra-competitive field of 1/8th
scale racing, and many drivers across the world are anxiously awaiting
this car! Our regular distribution chain will be ordering the Proceed,
so parts support will be good. We've already had a great response just
from word of mouth passing from racer to racer, and we know racers will
want to check out this new contender!
kit is only available without engine, and is competitively priced with
the best of the current 1/8th cars.
Proceed Catalog Page |
See our Customer's Proceeds