Blast Away with the Updated, Waterproof Bullet!
Introducing the New HPI Bullet MT 3.0, the RTR off-road vehicle that's ideal for all off-road bashers and enthusiasts! Now featuring a waterproof battery compartment, waterproof servos and rain cover for the air filter, the Bullet 3.0 is truly a go-anywhere machine!
This Bullet is a 1/10th scale monster truck fitted with a powerful 4WD drivetrain and extra-powerful HPI Nitro Star G3.0 engine with 2.2 horsepower, so it can power through all sorts of terrain and fly over any obstacles! Now fitted with a versatile and comfortable HPI 2.4GHz radio system, it's easier than ever to control the speed of the Bullet!
The Bullet MT 3.0 is just one member of a family of HPI vehicles which are based around a durable 4WD shaft drivetrain, 2 shocks per wheel and double-deck aluminum chassis. The Bullet off-road trucks feature either Nitro Star 3.0 engines or silent Flux brushless motor systems, and are available in different off-road truck varieties. In short, you can get the precise flavour of off-road performance you want with the HPI Bullet!
The Bullet 3.0 trucks now feature a cool waterproof electronics compartment for the receiver batteries and receiver, a sealed waterproof switch, a pair of 4.5kg waterproof servos and finally a water-resistant air filter cover that allows you to keep running your Bullet in extreme conditions that would kill almost any other Nitro vehicle!
Want to tackle that muddy bug? How about that stream crossing? A bit of rain about to fall? It's all good for the Bullet 3.0!
Please note: This HPI vehicle is designed to provide water protection so it can be driven in wet conditions (e.g. rain, snow, puddles). Not for submersion. Nitro engines are splash protected and require extra care when running in wet conditions. See manual for details.
All of the latest HPI kits are now fitted with a comfortable and feature-packed HPI 2.4GHz radio system for supreme control and confidence! The radio features a pistol-grip design with drop-down steering wheel, 3 channel functionality, easy carry handle, fold-down aerial, end point adjustments, servo reversing and steering dual rate. It's also extremely lightweight due to it requiring only four AA batteries.
You won't have to worry about radio crystals or what channel other RC racers are using with our 2.4GHz technology - the radio does all that work for you! The radio prevents frequency conflicts automatically and changes channels if there is any interference. Finally, if you ever lose radio signal or battery power, an electronic failsafe will bring it to a safe and controlled stop. You'll have professional-level control in one easy RTR package!
The Nitro Star G3.0 engine provides all the muscle for the Bullet 3.0 nitro trucks - it's loud, powerful and strong, to give you amazing acceleration and awesome top speed! The engine is started by a simple pullstarter system and is protected by a unique water splash cover and 2-stage air filter for extra protection, and the two-needle carburretor allows you to fine-tune the performance of the engine for any kind of weather or fuel.
Power: 2.2hp @ 31,000 RPM
Maximum RPM: 32,000 RPM
Carburettor: F2-6.5 (Composite 6.5mm)
- .18 size
- Composite slide carburettor
- ABC components: aluminum piston with chrome-plated brass sleeve or cylinder
- 2-piece racing clutch
- 75cc fuel tank
- Aluminum heat sink
- Dual-element oiled foam air filter with rain cover
Formed from 6061 aluminum for a combination of strength and light weight, the Bullet 3.0 chassis is durable, looks great and forms the ideal backbone for all the various components that make the Bullet trucks so tough!
The drivetrain used in all Bullet trucks is a full-time four-wheel drive shaft-type drivetrain
, just like the one used in 1/8th scale buggies like the World Champion D8 buggy. A shaft drivetrain is the best option for a kit that's expected to encounter every possible driving condition and track surface, so whether you're blasting through mud, water, dirt, grass, snow or gravel, this is exactly what you what you want!
A strong plastic 54-tooth spur gear takes the power from the engine and transmits it front and rear through an adjustable dual pad slipper clutch. A dual pad slipper provides more protection to the drivetrain than a standard single pad design, and we've included it as standard to make sure you get the best out of the Bullet.
The center dogbones drive the front and rear bevel differentials, which use 4 internal gears for increased durability and lifetime over standard 2-gear diffs. The diff outdrives turn tough steel outdrives and axles, and 14mm hex adapters spin the cool styled wheels wrapped with all-terrain tractor-tread rubber tires.
A single drilled steel disc brake
is used for extreme stopping power. Brake pads shod with material used in full-size trucks clamp down when the brakes are applied, bringing this beast to a quick yet controllable stop! All the brake linkage is fully adjustable, but you can leave it as set from the factory or it can be adjusted for prime operation on any surface.
For extra efficiency, all the components of the drivetrain, from the spur gear to the wheel axles, spin on rubber-sealed ball bearings
. With these bearings you get long runtimes and long engine life while the rubber seals keep out dust and grime!
Suspension and Steering
The Bullet MT 3.0 uses a tough suspension design derived from larger racing trucks, but with a few extra bits for increased durability! Long suspension arms are damped by 2 oil-filled shock absorbers each, and tough front and rear bumpers combined with skid plates protect both ends of the truck in just about every collision.
Extra-long suspension arms provide stability, and thick suspension pins give you extra insurance against crash damage. Both shocks on each arm are 'captured', meaning the mounting screw attaches on both sides of the shock end for extra durability in any type of conditions.
The suspension arms feature a solid construction for extra-tough construction and extreme durability. Multiple shock mounting locations let you fine-tune the handling for whatever you plan to be doing.
For advanced tuning, turnbuckle links
let you make quick adjustments, and even the steering links use turnbuckles so you can change the front toe setting if you wanted. Go ahead and try it - even though it's perfectly set at the factory for neutral handling, we don't mind if you try something new!
The shock absorbers are factory-fitted just like everything else on the Bullet MT 3.0, and are precisely filled with oil for exceptional handling in turns and cushioning when landing big jumps. With big coil-over springs they are the perfect match to the long suspension arms! Optional mounting points are provided on the suspension arms for lowering the stance of the truck slightly (great for running on-road) and stiffening up the suspension at the same time, without using option parts.
The hubs, steering knuckles, and rear uprights, are made of tough nylon plastic for enduring any sort of punishment. The front hubs have an oversized rock guard to keep pebbles and stones away from the dogbone/axle joint.
HPI makes it as easy as possible to get into RC racing action. The RTR Bullet MT 3.0 is completely pre-built and ready to go right out of the box! Everything is assembled and tuned for you by professionals - diffs, shocks, suspension and more are perfect before you even open the package. You don't have to do a thing to get going fast!
HPI Ready-To-Run vehicles bring you the same high performance and quality that you'd expect from a high end RC kit but with the added convenience of being factory pre-assembled to the highest standards - giving you a high performance RC truck straight from the box!
Just like all HPI cars and trucks, you get a full, in-depth instruction manual with step-by-step instructions that allow you to easily disassemble and reassemble your car for maintenance and easy servicing. The manual also includes a handy parts list and full-scale drawings of the parts and hardware. And the included HPI RC Car DVD is your personal RC car expert in a box!
- Factory-assembled & pre-painted 4WD Stadium Truck
- 2.4 GHz radio system for crystal-free, comfortable control
- Waterproof receiver/battery box
- Waterproof steering and throttle servos
- Covered air filter keeps water away from the air intake
- Painted and detailed bodyshell ready to strut its stuff!
- Strong and reliable Nitro Star G3.0 engine
- Easy and simple pullstarter for instant action
- Big 75cc fuel tank gives you plenty of runtime
- 6061 aluminum chassis provides the ideal backbone
- Tough bumpers combine with skid plates to protect all 4 corners
- 8 oil-filled shocks provide a plush ride
- Extra-long suspension arms provide stability and balance
- Proven racing design throughout
- Steel turnbuckle links allow you to custom-tune the ride
- Sealed shaft drivetrain is maintenance-free and super strong
- Double-pad slipper clutch design for extra drivetrain protection
- Reliable disk brake with adjustable linkage
- All-terrain tires look fantastic on black chrome wheels
- Intelligent fuel line routing to keep things neat and tidy
- A smart metal washer prevents over-tightening of wheel nuts
- Aluminum center brace for more durability over plastic brace
- Additional track-tuning options included in the kit!
#107006 RTR Bullet MT 3.0 W/ 2.4GHz
1/10th Scale 4WD Nitro Stadium Truck with
Nitro Star G3.0 engine, 2.4GHz Radio System and Painted Stadium Truck Body
Height: 160mm (Adjustable)
Drivetrain: Shaft 4WD
|WHAT YOU NEED:
8 AA Batteries
Nitro Car Fuel
Glow Plug Igniter
HPI Nitro Starter Pack includes everything you need!