Instructions for Savage SS

This is a 64-page manual, and this page has all the files for each page. These instructions are written in English, French, German and Japanese. This is the most current version of the Savage SS manual.

Having trouble printing?

#87032 Reverse Module instructions

NEW! #1425 Nitro Star S-25 manual

Page 1 Cover Page
Page 2 Cautions
Page 3 Cautions (French & Japanese language only)
Page 4 Equipment Needed
Page 5 Needed Radio Gear
Page 6 Parts Size Reference
Page 7 Parts Size Reference
Page 8 Parts Size Reference
Page 9 Parts Size Reference
Page 10 Parts Size Reference
Page 11 Start of Assembly Manual - Steps 1 and 2: Front and rear diff assembly
Page 12 Steps 3 to 5: Front and rear diff installation
Page 13 Steps 6 and 7: Front and rear bulkhead assembly and installation
Page 14 Steps 8 and 9: Front upper suspension arm assembly
Page 15 Steps 10 and 11: Upright installation
Page 16 Steps 12 and 13: Suspension arm installation
Page 17 Step 14: Front and rear skidplate installation
Page 18 Steps 15 and 16: Front and rear bumper mount installation; transmission assembly
Page 19 Steps 17 to 19: Transmission assembly, continued
Page 20 Steps 20 and 21: Transmission assembly, continued
Page 21 Steps 22 and 23: Transmission case assembly and front outdrive installation
Page 22 Steps 24 and 25: Rear outdrive installation
Page 23 Steps 26 and 27: Brake and slipper clutch installation
Page 24 Steps 28 and 29: Transmission plate assembly
Page 25 Steps 30 and 31: Twin Vertical Plate assembly and roll bar installation
Page 26 Steps 32 and 33: Steering arm assembly and installation
Page 27 Step 34: Steering and throttle servo installation
Page 28 Step 35: Receiver and battery installation
Page 29 Steps 36 and 37: Servo saver assembly and installation
Page 30 Steps 38 and 39: Throttle servo saver and radio box installation
Page 31 Steps 40 and 41: Front and rear bulkhead installation
Page 32 Step 42: Shock absorber assembly
Page 33 Step 43: Shock absorber installation
Page 34 Steps 44 and 45: Tie rod assembly and installation
Page 35 Step 46: Front and rear body mount and bumper installation
Page 36 Step 47: Engine installation onto engine mount
Page 37 Steps 48 and 49: Air filter installation and tuned pipe/header assembly
Page 38 Steps 50 and 51: Exhaust and engine installation
Page 39 Step 52: Throttle linkage installation
Page 40 Step 53: Fuel tank installation
Page 41 Step 54: Foam, tire and wheel installation
Page 42 Step 55: Body installation
Page 43 Radio Setup: Throttle
Page 44 Radio Setup: Steering
Page 45 Throttle operation and Cautions
Page 46 Truck Driving: Controlling While In The Air
Page 47 Starting the Engine
Page 48 Starting the Engine, continued; Stopping the Engine
Page 49 Engine, Truck and Tire Maintenance
Page 50 Adjusting the Slipper Clutch and 2 Speed Transmission
Page 51 Troubleshooting
Page 52 Exploded View
Page 53 Exploded View
Page 54 Exploded View
Page 55 Exploded View
Page 56 Warranty
Page 57 Warranty (French & Japanese language only)
Page 58 Parts List (English language only)
Page 59 Parts List (German language only)
Page 60 Parts List (French language only)
Page 61 Parts List (Japanese language only)
Page 62 Notes (intentionally blank)
Page 63 Notes (intentionally blank)
Page 64 Back Page (intentionally blank)