#101996 - SERVO HPI SB-5 (PIGNON METAL/11.8kg-cm 6.0V)
Servo avec pignons metal, vitesse : 0.11 sec., puissance : 11.8Kg-cm, 6.0V, 25 dents
Arrêté, replacement part: #105366
This quick and powerful servo is an ideal upgrade or replacement servo for hardcore RC enthusiasts looking for a stronger and faster servo to replace the stock steering or throttle servo on their vehicle. With metal gears, it's one of our best value servos, perfect for just about any application!
NOTE: NOT WATERPROOF! Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.