#80597 - HPI SFL-10 MG2 SERVO (METAL GEAR/24.0kg-cm 6.0V)
High Torque Servo/Futaba J Connector/Water Resistant/Metal Output Gear
Discontinued, replacement part: #102772
Seriously beef up the steering of your Baja buggy with this monster power SFL-MG2 servo! With metal gears and a tremendous 24kg/cm of power at 6 volts, you won't need anything else! Features 25 tooth spline.
Genuine HPI quality spare part for the Baja 5T 1/5th scale truck. See below for kit reference.
NOTE: NOT WATERPROOF! Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.