#106766 - FLUX VEKTOR 5900Kv BRUSHLESS MOTOR
5900 rpm/volt / Use with FLUX Vapor ESC
Upgrade to a zero-maintenance brushless Flux Vektor 5900Kv motor for the ultimate in performance and ease of use! The Flux Vektor 5900Kv brushless motor is standard equipment in the updated Sprint 2 Flux kits, making it the perfect partner for any Sprint 2, club racer or touring car for fun running. It can handle 7.4 volt (2S) LiPo batteries as well as 7.2v NiMH batteries for a range of possibilities! It's also fitted with brass bullet connectors that allow it to plug directly into the Flux Vapor speed controller for total ease of use and a simple package upgrade for any car or truck fitted with a brushed motor system.
- High torque/high temperature neodymium magnet
- Oversized precision sealed bearings
- 3.2mm 1/8" hardened steel shaft
- 4 Pole rotor for more torque
- Triple insulated windings for long life
- Black anodized case
- Easy to Install
- Compatible with any sensorless ESC
- Use with the #106627 Flux Vapor waterproof ESC for best performance
NOTE: Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.