Nitro Touring Car Racing at its Finest
The HB R10 is the latest kit from the minds at HB-HPI to enter the exciting and fast world of 1/10th scale on-road touring car racing! This time, we're diving into the nitro end of the racing arena, with a unique, high-spec nitro touring car kit that is sure to amaze nitro racing fans! Top-level nitro touring cars are a completely different type of racing class compared to electric touring cars - you can't just add an engine to any touring car design be off to the races. Properly designing and testing a car takes months, even years, and the standard of materials and design has to be at the highest level - at over 60mph, even on smaller tracks, every componenent has to serve a purpose and be designed to perform! That's why only the best materials went into the R10: titanium, aircraft aluminium, carbon graphite, top-grade composites and more. The R10 is built from the ground up to perform, and to win. Experience the thrill of nitro racing with a World Championship racing team!
 
 
Total Control
Like every HB racing kit, the R10 allows you to set and refine every possible adjustment on the chassis. You can tune such parameters as roll center, front and rear arm toe, camber, caster and more. You can fine-tune the chassis roll front and rear with sway bars at each end, and the robust pivot-ball suspension gives you precise control of the camber and rear toe with a quick twist of a hex wrench.
 
Chassis
 
The R10 chassis is CNC machined from aircraft aluminium, and is designed to be extra-narrow, which prevents any rubbing while cornering, which can upset the car when you're going for that perfect lap. Woven graphite of the highest possible quality is used for the upper deck/radio tray and all the stiffeners and supports throughout the car. Thick woven graphite is utilized for the front and rear shock towers for extra crash protection so you can finish the race instead of worrying about damage to the car. The bulkheads, pivot blocks and spacers are all constructed from top quality aluminium and anodized a bright orange. The easily removeable fuel tank sits in the exact center of the chassis, with the battery pack positioned underneath for a completely centralized weight balance. To help lower the CG even further, the servo positioning places them flat on the main chassis for fast weight transfer and superior cornering speeds. The engine mount is a multi-piece unit, allowing both OS and Novarossi style engines to fit straight on. Performing engine swaps and maintenance is simple and easy - the multi-piece mount lets you change engines without having to set the gear mesh each time. An extra-thick foam bumper sandwiched between stiff plastic supports protects the front end of the car, and a carrying handle will help your pit crew make lightning-fast fuel stops!
 
Suspension
 
Being a completely new car design, the R10 consists of all-new parts, but that doesn't mean it ignores design conventions for the sake of being new and different. The R10 uses proven racing suspension design to give racers of all skill levels all of the tuning capability they want, and without the bother of complex and hard to understand race car suspension theory. The front camber is set by an extremely solid 'pivot ball' design, which gives you infinite control over the track width of the car as well. Simply insert a hex wrench through the wheels and you can do a fast setup change - no turnbuckles necessary. The front caster is set by moving the upper suspension arm forward and backward on a solid hinge pin, giving you precise control of the steering into and out of corners. The rear track and rear is controlled with the same extra-sturdy pivot balls, while the rear camber is set with titanium turnbuckles. The shocks are a normal oil-filled, coil-over design, with threaded bodies and threaded top and bottom caps. The shock bodies are coated with super-slick PTFE for near-frictionless movement of the piston, giving you effortless and smooth suspension movement. Controlling the chassis roll at each end of the car are adjustable sway bars - a blade-style sway bar in the front and a conventional bearing-supported bar style sway bar in the rear.
 
Drivetrain
The R10 has universal driveshafts front and rear, with reinforced drive belts taking the power from the gearshaft to the front end, and to the rear solid diff.
 
The drivetrain is fully equipped with lightweight, hardened aluminium pulleys for low friction, decreased rotating mass and long life. The pulleys are also anodized a cool gunmetal color in a great example of attention to detail.
 
A critical component of any on-road nitro racing car is the 2-speed transmission, and complete attention has been paid to this area of the R10. Using 0.08 Module gears for smaller gear teeth allows lower rotational mass and increased gear life.
 
A Proven World-Class Racing Car
 
IFMAR World Champion TQ and 2nd, 4th and 10th Place!
 
At the world debut of the R10, entire team HB factory drivers achieved their goal of getting into the Main Final, dominated qualifying with an unbeatable Top Qualifier position, and set the fastest pace of the 60-minute race for the World Championship!
 
 
photo credits to RedRC Check out more pictures from the 2012 IFMAR 1/10th IC Worlds on RedRC!
Watch the complete Main Final race by clicking here! Live video from Thailand provided by RC Racing TV
 
Features Summary
  • Centralized lower weight distribution provides superb balance with increased transitional agility
  • High quality universal driveshafts front and rear for the best drive efficiency
  • Titanium tie-rods, rear camber links, middle shafts and rear sway bar joints
  • Hard coated aluminum pulleys (except the rear diff pulley)
  • Separated (upper and lower) bulkheads allow for quick and easy diff change and drive belt tension adjustments
  • New fuel tank equipped with EZ cap designed for least fuel liquid level change for the best fuel efficiency
  • 4-piece engine mount compatible with both OS and Novarossi type engines
  • High precision brake rotor and brake pads that is made of the material used in real racing cars provide superb stopping power and brake feel
  • Servo saver with one-touch Ackerman adjustment system
  • Multiple suspension pivot point adjustment system allows for fine roll center tuning
  • Direct fit wing mounts on rear shock tower
  • PTFE-coated oil shocks
  • Efficient 0.08 module gears
  • Wheels, tyres, body and electronics left for your choice
 
#108382 HB R10 Nitro racing touring car kit. Bodyshell, engine, exhaust, electronics, tyres and radio system required to complete the car.
 
HB R10 Spec: Length: 366mm Width: 200mm Height: 105mm Wheelbase: 261mm Weight: 1700grams Gear ratio: 1st=7.56:1.0, 2nd=5.27:1.0
 
What You Need:
  • .12 size racing engine with rear slide carburetor
  • Tuned exhaust pipe
  • Body
  • Foam tyres
  • 2-channel radio system with 2 servos, receiver and battery
  • Fuel
 

Select your region:

Select your language:

Get more HPI! Login to MYhpi now!