#87130 - HPI ROTO START 2 SYSTEM (FOR NITRO STAR F SERIES ENGINE w/PULLSTART)
For HPI Nitro Star F Series Pullstart Engines/Requires a 7.2V rechargeable "stick" battery pack and charger.
Start your vehicle quickly and easily with the updated Roto Start 2. The Roto Start 2 features a more durable case and to protect your engine it comes with a built in circuit breaker which cuts off in case of an overload (e.g. a flooded engine).
This HPI Nitro Roto Start 2 system is for the F & G series engines that use a 12mm One-Way Bearing.
The F3.5 V2, F4.6 V2, and G3.0 HO engines use a 14mm One-Way Bearing. For these engines use backplate #113736 or change the bearing to #1430.
Note: When using this system for the Trophy Truggy, whilst not
essential, using starter shaft #87104
will give you some extra reach to the back of the engine.
The Roto Start 2 comes in three versions:
#87130 - HPI Roto Start 2 System for the Nitro Star F Series Engines
#87132 - HPI Roto Start 2 System for the Nitro Star 12/15/18 Engines.
#87148 - HPI Roto Start 2 System for the Nitro Star K Series Engines
7.2V stick battery packs are not included.
Please see our Roto Start Compatibility Guide to check if this is the right Roto Start system for you.
Descarga las instrucciones en PDF para #87130 (4.5 MB)