Esta parte es adecuada para los siguientes kits / partes:

Mostrar los Kits descatalogados

#102491 - HPI SF-20 SERVO (HIGH TORQUE/6.6kg-cm 6.0V)

High Torque Servo/25 Spline

Descatalogado, Repuesto: #104109

Partes Estándar

New from HPI is the high torque SF-20 Servo. The SF-20 is a high-performance upgrade to the SF-1 servo, and a direct replacement for the SF-2 servo found in many HPI car and truck kits.

Specs:
6.0V Speed: 0.17sec/cm
Torque: 6.6kg/cm
High Torque
25-tooth Spline

NOTE: NOT WATERPROOF! Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts. 

Descarga las instrucciones en PDF para #102491 (0.2 MB)

Selecciona tu región:

Selecciona tu lenguaje:

Más HPI? Inscríbete en MyHPI!

Selecciona tus ajustes de región y lenguaje