Savage Power with Electric Convenience!
For durability and ease of use, the dual-battery, dual-motor electric E-Savage can't be beat! Full-time 4WD and Savage design place it well above any other electric monster truck you can find today! The E-Savage is completely pre-built with and equipped with an electric drivetrain for total ease of use, tough build quality and outstanding power and performance! There's no easier or fun way to get into the world of off-road electric monster trucks! Simply charge and go!
The E-Savage is fully factory assembled for you: just pull it out of the box, charge the batteries and get going! With a professionally built chassis, completely painted bodyshell, fully installed electrics, all you have to do is install the transmitter batteries - it doesn't get any easier!
  • Completely ready to run (RTR) - just supply 8 AA batteries forthe transmitter
  • Twin motors, electronic speed control and all radio equipment installed
  • Two batteries and twin-charging GT Escape battery charger included
  • Painted and trimmed bodyshell included for instant custom looks
  • Pre-glued all-terrain tyres grip every surface
  • Full manual included for easy repairs
The E-Savage isn't just about looking great, it's also a top performer, with loads of horsepower and torque! Equipped with two powerful 550-type motors, you'll experience massive hillclimbing power and blistering top speed! Powering the motors are a pair of extra long-lasting 3300mAh batteries, which sit as low as possible in the chassis, and as close to the centre as possible, for the best handling and performance, whether you're on the racing track or at a fun bashing session! Controlling everything is a special dual motor, dual battery GT 14.4 volt electronic speed controller (ESC) which regulates the power to the motors. It features a tall purple aluminium heatsink to shed any excess heat and also has a reverse function so you can back out of trouble. With a fully proportional throttle you'll have fine control over the E-Savage! Setup is a breeze, too: a fully automatic setup function makes sure all you have to do is turn on the ESC to get it dialled in - no complicated setup procedures are required!
  • Twin GT550 Electric Motors have loads of grunt and top speed muscle
  • Twin 3300 mAh Ni-MH rechargeable battery packs for long runtimes
  • GT 14.4v electronic speed control with reverse for suburbcontrol
The E-Savage was based upon the strong foundation of the toughest RC monster truck around - the Savage! With its Twin Vertical Plate (TVP) aluminium chassis design, central transmission, 8 shock absorbers and dual wishbone suspension, the E-Savage is ready for anything! Getting the power of the twin GT550 motors to the ground is the E-Savage's drivetrain, which features a racing-style twin plate slipper clutch, central transmission, sealed gear diffs and sliding universal dogbones. Every component uses sealed high efficiency ball bearings for efficiency, long life and durability. Big 5.4 inch all-terrain tyres wrap around cool 5-spoke chrome wheels and grip on every surface - tarmac, grass, dirt and more! You can even fit any 14mm Savage wheels and tyres to the E-Savage!
  • Adjustable Twin Plate Slipper Clutch for extra drivetrain durability
  • Durable TVP (Twin Vertical Plate) aluminium chassis
  • 22 high efficiency ball bearings provide maximum efficiency
  • 8 long-stroke oil-filled shocks soak up all bumps and jumps
  • Double wishbone fully independent suspension for great handling
  • 14mm hex hubs, compatible with standard Savage wheels and tyres
THE FIRST ELECTRIC POWERED SAVAGE MONSTER TRUCK! Electric power is the easy way to get into off-road monster trucks. Charge up, switch on, and enjoy the ride. The E-Savage captures that ease and adds the proven durability and extreme off-road capabilities of the famous line of Savage trucks. You need a tough and powerful truck to handle electric off-roading, and the E-Savage delivers. TWIN VERTICAL PLATE CHASSIS The Twin Vertical Plates (TVP) chassis design was inspired by the time-tested durability of our Savage line. Twin Vertical Plates serve as the stable core of the chassis design, providing the critical strength needed to stand up the abuse of hard off-road driving. The rigid aluminium TVP chassis has a stylish design that places the front, rear and centre gear boxes between two upright aluminium plates. With the V-shaped battery layout (VBL) we have placed the batteries (the heaviest items on the truck) at the lowest possible position to make the centre of gravity very low for quick and precise handling. SYMMETRICAL 4WD LAYOUT The E-Savage has a symmetrical power train layout with twin motors located around the centre and twin batteries on the left and right sides of the chassis. This layout creates excellent chassis balance to contribute to great drivability on rough terrain and stability in high-speed driving. Full-time 4WD puts the power to the ground at all four corners, with 8 oil-filled shocks to soak up the bumps. The result is a real go-anywhere monster truck. TWIN MOTORS & TWIN BATTERIES Two high-power 550-size motors come pre-installed, giving the E-Savage the power you need for off-road action and wheelies on command. Each motor has a cooling fan inside so they run cool and generate high power. Two 3300 mAh 7.2V rechargeable Ni-MH battery packs are included for 14.4 volts of electric off-road power. And, the included GT Escape charger allows both batteries to be recharged at the same time. ELECTRONIC SPEED CONTROL! The E-Savage comes equipped with an easy-to-use electronic speed control to handle the twin motors and twin batteries. The GT Speed Control delivers fully proportional throttle control and has built-in reverse to power you out of sticky situations. The FASF (Fully Automatic Setup Function) automatically sets up the speed control, no adjustments necessary, just plug in and drive. A large purple anodized alloy heat sink and electronic overload prevention circuitry automatically protects the ESC from overheating. TWIN PLATE SLIPPER CLUTCH A high capacity twin plate slipper clutch is attached to the spur gear to protect the drive system from impact while jumping. Placing the spur gear between two slipper disks helps the drive train handle the power of the twin motors and can be adjusted to track conditions. COMPLETE SET OF BALL BEARINGS Twenty two precision manufactured ball bearings are used in the drive train to reduce maintenance and efficiently transmit the power of twin motors and twin batteries to the tyres. WHEELS AND TYRES Big 5.4 inch diameter tyres easily climb over fist-sized rocks. The block pattern of the tread ensures long life and stable grip on dirt and paved surfaces. The tyres are wrapped around high gloss chrome wheels, pre-glued with inner foams pre-installed. The wheels and tyres are compatible with a huge variety already available on the market for the Savage, so customizing your E-Savage is easy.
  • Completely Ready to Run
  • Twin GT550 14.4V Electric Motors
  • Twin 3300 mAh Ni-MH rechargeable battery packs
  • Includes a GT Escape quick charger, capable of charging two batteries at a time
  • HPI TF-3 super narrowband AM transmitter with changeable frequency crystals
  • Pre-painted and trimmed body
  • Twin Plate Slipper Clutch
  • Electronic speed control with reverse
  • Durable TVP twin vertical plate aluminium chassis
  • High efficiency ball bearings
  • 8 long-stroke oil-filled shocks
  • Double wishbone fully independent suspension
  • 14mm hex hubs, compatible with standard Savage wheels and tyres
RTR E-Savage with pre-painted bodyshell. Comes with everything you need to get started, including detailed instructions manual and comprehensive HPI RC Cars DVD. 505 - RTR E-Savage with ATV bodyshell 508 - RTR E-Savage with Baja TT bodyshell 548 - RTR E-Savage with GT Truck bodyshell

Änderungen vorbehalten!

Wählen Sie ihre Region:

Wählen Sie ihre Sprache:

Hol' Dir mehr HPI! Jetzt bei MYhpi einloggen!

Bitte wählen Sie ihre Region und Sprache für das Menü unten